AV760 entering system config

lucan138 · **Joined:** Mar 2008 **Posts:** 3

Hi, New to this site so bear with my ignorance.
I have stupidly set my AV760 to PPPOE and can no longer log in to DVR.
Does anyone know how I can reset to static IP.
Thanks in advance for any help.
lucan138

trotsky2 · **Joined:** Mar 2008 **Posts:** 5

lucan138 wrote:

Hi, New to this site so bear with my ignorance.
I have stupidly set my AV760 to PPPOE and can no longer log in to DVR.
Does anyone know how I can reset to static IP.
Thanks in advance for any help.
lucan138

can't be sure but if you have a lithium backup on the processor board, you may find a reset switch or jumper to disable battery this should reset firmware to factory specs (providing defalt is "static")
keep in mind this action may void any warranties

securicorp · **Joined:** Mar 2007 **Posts:** 30 **Location:** London, UK

lucan138 wrote:

Hi, New to this site so bear with my ignorance.
I have stupidly set my AV760 to PPPOE and can no longer log in to DVR.
Does anyone know how I can reset to static IP.
Thanks in advance for any help.
lucan138

If you have access to the DVR, enter the menu, look for system, then look for network, there you will be able to change system back to static.

scorpion · **Posted:** Fri Apr 04, 2008 9:51 pm

http://scorpiontheater.com/reset.aspx

si_kungs · **Posted:** Tue Apr 08, 2008 9:09 am

if your dvr is in a remote location. you need to go to the site and do the changes in the network setting of the dvr.

AV760 entering system config

Who is online