| exahertz |
|
Posts: 2
Joined: 15 Jun 2008
|
|
Posted: Sun Jun 15, 2008 10:32 pm
Post subject: Conexant Fusion based 4ch DVR card problem
|
| |
 |
 |
Hi, i have a odd ball DVR card that i cant seem to find any info on.
anyways... on the card is 4 conexant fusion 878a chips. i installed the WDM drivers for the chips and in device manager they are seen as "Studio WDM video capture". it also installed a lot of other stuff and all of the devices are working properly. i have noticed that all of the Studio WDM video capture devices IRQs are set for 11 but i cannot change anything.
heres my problem:
I use my dvr program Eyeline, and can see four selectable cameras, and in the program i can select all four at once. so the software is okay (im pretty sure). but i can get an image from only one input at a time.
if i have cameras on inputs 1,2,3 and 4
and in device manager i have all four 878 chips enabled
only channel 4 will have an image, and the other three are black
Eyeline will say that those 3 devices are unplugged.
if i have cameras on inputs 1,2,3 and 4
and in device manager i only have one 878 chip enabled
Eyeline will see only that one 878 chip and there will be an image there
if i disable that one 878 chip and enable another i can see another camera\
its kinda acting like theres some sort of conflict.
any ideas????
Thanks, and happy fathers day!
|
|
