I have an STI 7100k enclosure with a samsung SDC415 camera in it.

I had a yellow jacket get inside the enclosure trying to make a nest,
and now there's a small spot on the lense I need to remove.
(and yes, its on the lense, not the enclosure viewport).

How do I remove the camera from the enclosure to clean it?

Also any tips on proper lense cleaning would be appreciated.

I haven't used that specific model, but most housing have a tray on the bottom that the camera is screwed into. Sometimes the tray comes out sideways then upward, so that the screw can be removed, sometimes the tray is actually screwed in. Looking at the spec sheet for that housing
http://www.sti-usa.com/pdf/install/7100install.pdf It appears that there is a 1/4-20 x 3/8" screw included to secure the camera to the tray or housing.

Any tips on how to properly clean the lense?

I believe the lense is a tamaron

Clean the lens with lens paper,,,,

or papertowel and glass cleaner,,,


or the bottom corner of your shirt when your up on a ladder with nothing else handy :twisted: