I bought this camera off of e-bay in a lot of other camera's.
Can someone give me info on it & how it works, what I would need to use it or test it.

It is black has 20Z704USB and ser# Vidiology VN03103054A
It has a USB connection, S-vido out, Power remote and a vidio out.
On the lense: Optical 16x power zoom
vidio auto focus f=4.0~64.0mm 1:1.4 zero with a backslash thru it 46

Do you have the following?
Wired Remote Controls 60ZRC006 / 60ZRC100
12VDC Power Supply 60PR12DC800
Power Cable 60C0014
Software Interfaces SFT-03005

These are the listed accessories. Looks like it comes with software for recording to a PC. And should have a remote to control the zoom. It has a BNC output for recording to DVR.

Power it up and put a service monitor on the BNC out. Use the remote control(has an power out on the back for the remote) to control the zoom function. If you do not have the remote control shop for either remote part number and it should come up.

From the look of it, it does not support Pelco protocal so you probably will not be able to control via your DVR.

I can't post links but do a google search on 20Z704USB and a link to a spec sheet will popup.

Thanks for the info.
I think I'll see if I can find a power cord it's a strang looking with 6 pins in it. Do you think it will work with out the software?

Anytime!

It should work fine if you use a the BNC output and run it to the DVR. I googled the power supply part number and it came up as:
12V DC 800mA Power Supply
12VDC 800mA Regulated
2.1mm female connector

So any standard 800ma plug in regulated transformer should work fine.

Thanks,
From the specs it seem to be a god cam.