I have a gv-800 that is running ver 6.05 it is a D style card about 4 years old. I have one camera that shows an image indicates motion detection and nothing is recorded every other camera is working fine. I checked all setting and see nothing different with this camera (cam1) any ideas as to I am having a computer/camera/geo issue :?:

It's somewhere in your configuration, if you can see the feed onscreen it's working properly.

You might look inthe IO/Alarm sections, with IO you can disable recording on the cameras by NC switches. If a switch were disconnected or removed that channel would no longer record.

Check the box that says "Register Motion" and see if that helps.

Worst case scenario, let me logon and check it out for you.

Rory