Installation Help and Accessories
»
power supply needed for a AV TECH 777
(
>> )
elbruceo - 07 Sep 2008, 08:04 pm
Hello
power supply needed for a AV TECH 777
I need to buy one or build one does any one have any info that may help
Kiwi - 07 Sep 2008, 08:46 pm
Is it not marked on the back panel? I would assume it's the same 19VDC many other Avtech's use, need at least 45 watts. A 19V power pack typically used for a Dell notebook should work with the correct plug installed.
elbruceo - 03 Oct 2008, 01:18 pm
QUOTE:
Is it not marked on the back panel? I would assume it's the same 19VDC many other Avtech's use, need at least 45 watts. A 19V power pack typically used for a Dell notebook should work with the correct plug installed.
Thanks for the info
this unit has an 8pin din plug with no voltage info so I could use the pin out if any can find them or point me the way to go
scorpion - 03 Oct 2008, 09:02 pm
http://www.weclonline.com/tchi/productdetail.asp?id=50122822
12 Volt 3 Amp 5 Volt 6 Amp
For AVC774, 776
Suitable for AVC777, 774
_____________________________________________________________
http://www.gx-security.co.uk/tech-ake551psu-channel-power-supply-p-941.html?manufacturers_id=36
_____________________________________________________________
http://www.watt-power.co.uk/catalogue/watt-dual-output-adapter-jentec-jta0409-p-581.html
elbruceo - 04 Oct 2008, 10:37 pm
Thanks