There are a couple reasons for you have " No privilege " on the webcam.

1. Check your account status.
In the GeoVision System, go to Configure icon >> Password Setup >> Local Account Edit.
Please create a new UserID as supervisor and try it.

2. Recording by schedule.
If you have setup a schedule for recording, check the following. Otherwise, skip this step.
In the GeoVision System, go to Schedule icon >>Schedule Edit.
Did you put a check mark right next to " view ".


3. Remote Authentication.
Did you accidentally setup an remote authentication server?
In the GeoVision System, go to Configure icon >> Password Setup >> Remote Authentication Setup.
Did you see the following window? If you did, please let me know...

4. Reset passwords.
In the GeoVision System, go to Configure icon >> Password Setup >> Local Account Edit.
Check a box called " allow removing password system.

Close the GV system.
Go to C:\GV folder\ PassUnInstall.exe.
Double click that and reset the password.

Now enable the webcam server and try it.

Any questions, let me know..... :D

Sincerely,

Andy Chen

Technical Support
GeoVision. Inc.
+886-2-8797-8335 ext 287

i'm getting the "no privlege error" using remote-view & webcam view

doesn't appear to be a acct/password issue. when i turn off scheduled recording, it works

i have 2 schedules, & both have the "view" box checked

schedule 1 is for camera 1 & 2. they both work w/ remote view. it's on motion-detect all day from 00:00 to 00:00

schedule 2 is for camera 3. it doesn't work w/ remote view. it's on motion-detect from 21:00PM until 08:00AM

the time & camera #'s are the only difference in the 2 schedules

any suggestions?

think i found my problem

it appears you can only view a scheduled camera during it's schedule

so i can only view my cam3 between 21:00 & 08:00

if i try to view @ 20:00, i get the "no privlege" error

is this a bug or a feature ?

is there some way to remotely view the camera 24 hrs a day, but only record between 2100 & 800 ?

Set up a schedule for the time in between recording, untick Record, and tick Remote