:   Archive home

DVR Cards and Software - PC Based Systems

  »

sms modem

   ( >> )
fixman - 29 Nov 2005, 12:05 pm
Hello,
I like to setup sms on my system, i read in the user manual that i need GSM/GPRS Modem :shock:

any info about this modem
price ?
any one tried to use ?
where i can buy ?


thanks
kandcorp - 29 Nov 2005, 12:06 pm
Need more info please.
What system, specs, brand, make, model, etc.

Thanks,
fixman - 29 Nov 2005, 12:10 pm
ok sorry . lol

it's gv-800 on pc
scottj - 29 Nov 2005, 02:37 pm
yes, you need GSM/GPRS modem to use this feature.

Scottj
CollinR - 29 Nov 2005, 04:11 pm
Sign up at http://ipipi.com just tell geovision to email the address ipipi provides and it will forward it to your cell phone.
scottj - 29 Nov 2005, 04:28 pm
yeah that works too.

Scottj
fixman - 29 Nov 2005, 05:54 pm
can i trust this ipipi for my customer or its better to use the modem ?
scottj - 29 Nov 2005, 06:05 pm
If your customer is large enough and you need SMS for multiple employees, then go with the modem purchase and do it that way through their secure network. If it is just a few people, it may be best to have them purchase "credits" from www.ipipi.com and use that method.

Scottj
andy - 08 Dec 2005, 12:41 am
In reply to the original post, yes you need a modem. You'll also need a SIM chip from a wireless provider. You should be able to get a model # from Geo Tech Support.
smarty - 15 Dec 2005, 02:28 pm
I do not think you HAVE TO HAVE a cellular modem to send SMS messages.

I have found that I can set up my Geo card to send an instant SMS text message via my RoadRunner (TimeWarner), or Sprint smtp mail server using the e-mail notiifcation built into the Geovision software. You just need to send the e-mail to the right addresss of the target telephone.

For example, my Sprint Treo 650 phone email SMS address is:
210xxxxxxx@messaging.sprintpcs.com

For a T-Moblie phone it would be:
210XXXXXXX@tmomail.net

Hope this helps.
jalltec - 16 Dec 2005, 02:03 am
Smarty, thanks for the idea.
I am a newbie and so far that hadn't occured to me.
I tried it and it works like a champ! I rcv'd the alerts SUPERFAST!
One question though. Geovision allows you to attach an image to the email and this shows up as excrypted garbage on the text.
Is there a work around, that you know, to rcv the entact .jpg?
I'll try it as a .png but doubt it will work.
scottj - 16 Dec 2005, 08:53 am
You guys are talking about two different notification methods completely. What Smarty says does work, however it is not to be confused with SMS (Short Message Service). You are just using email notifications is all.
These are different.

For the attaching the image question when using the email notification to a cellular phone, just disable that feature.

Scottj
Banner