Jump to content

Joebo

Members
  • Content Count

    97
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Joebo

    Backing Up the DVR

    I've never used these before but there data sheets states you can archive to USB 2.0. However, the manual doesn't tell you if you can archive a day or week or whatever. it only states "archive in increments of minutes" which make me believe the answer is no. My guess is when they refer to archive to USB 2.0 they mean burn an incident (burn to DVD or USB)! Check out the manual here - http://www.atechsystems.us/manuals/Symsafe_Pro.pdf
  2. This guy is NOT safe at all! If you were my daughter I would've made you move already. Now his son is an a-hole too! Unbelievable! You need to let everyone and their brother know what's going on because psycho boy is dangerous. No denying that fact! First off, drive around with your camcorder and record your every movement and his foul language. Or, maybe it's time to contact somebody about covert camera and audio recording (in your hat, button, or the one that looks like your headset for the phone... something!). Do not take this lunatic lightly! Can you put a tree or a flag up in front of his camera? Also, go buy big ass spot light! Shine that right into his camera it'll be useless. If the cops say anything, tell them you saw a peeping tom (aka freak boy neighbor). Next time, i saw a bear. Next, I saw a raccoon. If he can say bullcrap every time you call them... so can you! Plus you won't bee shining it into his house, but you'll be disabling that camera. If it were a b/w camera you could buy an IR illuminator and shine it directly into the camera. he won't see the light and neither will you, but that camera sure will and all he'll see would be a washed out white spot on his video! Bottom line... get the "blank" out of there!
  3. Joebo

    Color Issue blue is black

    I've seen this on the cheap... um, i mean inexpensive bullet IR cams! The ones i had were all defective! Should've known better... this is commonly referred to as the "cheap man always buys twice" phenomenon!
  4. sounds to me like this is a question of integrate vs interconnect! If your talking integrating an IP camera with a VMS software... isn't that what ONVIF does for the IP world? http://www.onvif.org/ If the companies are following these standards, i can take that IP camera and connect it up to my VMS system without having to write a sw interface (using an SDK). If they are talking about integrating access control and CCTV... they can do some integration using RS232 (like an ACS would talk to an analog matrix). This has been done for years. And if the VMS or DVR accepts ASCII data, we could even start recording, speed up frame rates, etc. based on the text that the access control system outputs. Other than that, in order for software A to communicate with software B... you need to use the API (SDK). If not, you're doing basics interconnection via RS232, inputs and outputs or some other rudimentary means!
  5. Joebo

    Service Manual?

    What's a VCR? Good luck finding that manual. In the meantime, what are you trying to do? If connecting to a Multiplexer, use the trigger connection to synchronize the two units. The mux will have an input and the VCR will have a cam switch output. Go to the following link for a tech bulletin (it'll be the same for most vcr/mux combo's) http://americandynamics.net/support/documents_index.aspx?docType=201 (click on Analog VCR and look for Synchronizing a VCR) If you're using for anything else, get a T180 tape (it's a High Density VCR) and press record! www.swilber.com/Web-Collateral/TLC4000V ... Y-FAQf.pdf Good Luck!
  6. Give them a call at 1-800-320-4888. The system states that it can save to AVI file format and more. Call them up and tell them that's what you want to do. http://www.oscdigital.com/contact.htm
  7. Here's the manual! cbceurope.co.uk/CCTV/.../ZR-DHD_DVRs_Inst_Manual.pdf
  8. Joebo

    SpeedDome Ultra III

    The SD Ultra III is an American Dynamics unit. You would need the DVR to output either "Sensormatic RS422 (4-wires, shielded)" or "American Dynamics RS422" because at that time they did not have other manufacturers protocols (e.g. pelco, vicon, bosch, etc.) built in. Or, go on Ebay and purchase a TouchTracker Controller (ADTT16E). This unit will output SensorNet data (2-wire, no shield) to control both domes. Just make sure they sell you the EIM module and cable along with the touchtracker otherwise it's useless to you. You need the EIM to supply power to the keyboard and output the SensorNet data to the domes. And, yes you can star connect off of the EIM module.
  9. You do have quite a few to choose from. I like: Milestone - easy to use, very well supported, not many issues that I've experienced. http://www.milestonesys.com/home ONSSI - Love that Ocularis interface... like an iphone! I think it's the best looking interface out there. They run on Milestone (at least i think they still do). http://www.onssi.com/ Genetec - is there anything this software does not do! Also, nice interface. http://www.genetec.com/English/Pages/Default.aspx VideoEdge (American Dynamics) - love the fact that it's Linux and very nice architecture, but... the GUI works but needs a face-lift and they don't support as many cameras as the others! In my opinion, the top 3 are the ones to choose from! We use VideoEdge because our existing AD clients will eventually have one sw platform to communicate with their existing product. As for the 3 you've seen, I haven't done anything with any of them. Sorry, i can't help you there! Only thing i can say is the reason we never used Endura or Indigo is because both are very much proprietary systems (a lot more than most anyway). You need Endura storage or Indigo cameras only and Endura workstation, Indigo Encoders and so on... All the others let you use what you want. Not that you have to you something else, but if you run into issues... it's nice to have options! For example: I like to use Axis cameras (www.axis.com) because of their progressive scan technology. I think their video looks good and when I've got people walking through the scene or I'm moving a pan-tilt camera... i get a clean image. I like Panasonic (http://www.panasonic.com/business/security/home.asp) and Sony (http://pro.sony.com/bbsc/ssr/cat-securitycameras/) cameras too. I like Ganz for my down and dirty IP solution because they do 95% of what i need a system to do at a great price! And, i use them instead of the original vendor because they stock stuff and support is good. I like Intransa (http://www.intransa.com/) because at least they've tested their iSCSI storage with many popular DVR's and NVR's. And, now they offer VideoAppliances so I can be sure that the device I'm putting in to run my NVR has been tested with the NVR platform i choose. Less chance for failure! Plus it is pretty good looking for a bright green device! I can certainly look in any rack and quickly identify my NVR and Storage! Bottom line, none of the 3 you've seen are going anywhere so you can be sure you'll be supported. My only other suggestion may be to get yourself a ticket to Anaheim, CA and head out to the ASIS 2009 show Sept 21-23. You'll see everything there! Go here to sign up for a free pass - http://www.americandynamics.net/whoweare/events.aspx (plus there are some great parties to attend) Good Luck!
  10. Joebo

    Video cleaning software???

    http://www.salientstills.com/products/index.html http://www.dynapel.com/products/category.php?c=27
  11. Joebo

    Help With INTELLEX DVMS

    Sent you a PM with the process!
  12. From what i can see, it was recorded by AV Tech. Maybe the AVC787 - Supreme Pentaplex System or 761. Go to: http://www.securicorp.com/support/ Under downloads you'll see the Remote CCTV Software. Download this and hopefully you'll be able to play back the video!
  13. Joebo

    Veracity Lan and POE repeater

    used them on shorter runs without a hitch. used Nitek on longer runs also. No problems with either!!! http://www.nitek.net/newproducts_asis.htm
  14. maybe at Nitek... http://nitek.net/utplinks_xp/index.htm
  15. http://ipvideomarket.info/tutorials
×