Jump to content

tomcctv

Integrators
  • Content Count

    11,773
  • Joined

  • Last visited

  • Days Won

    131

tomcctv last won the day on November 26 2023

tomcctv had the most liked content!

Community Reputation

187 Excellent

About tomcctv

Recent Profile Visitors

23,685 profile views
  1. Hi. One good system is the TVT … I have been using them for installs the last 6 years it also has one of the best apps available with full control over the system the only problem with that Swann system is the cameras won’t work on anything else how many cameras are you looking for and what type of property will be protected ?
  2. Hi this still depends if windows based of Linux based ……. Most Linux based DVRs only store the recorded data on the hard drive …… will still run without hard drive fitted but no storage
  3. Hi it depends on your DVRs operating system …. In your case it sounds like an old windows based …. In this case settings are stored on the hard drive…….. hard drive is split in two known as a partition… one part master (for settings and operating software……. And other part is storage (recordings ) usually found on geovision or avermedia
  4. tomcctv

    Use old Android phone

    Hi yes it’s possible… you will need to have a recorder which uses a app
  5. Hi can you give more information are boxes on conveyer belt how fast are they going are you placing the labels on why go cloud when a recorder is better
  6. tomcctv

    SuperLive plus

    Hi it depends how your setting it from app it’s under resolution adaptation but you can also set the app on the unit >system and tick app live self adaptation how old is your system ??
  7. tomcctv

    SuperLive plus

    Hi. Switch self adaptation off on your phone app …. Under local settings …… top left button. then go to a camera on your normal app screen …. At bottom you will see a square with a pic of an eye …. Click on that then click high definition then back to normal screen then again click the same box with eye in it and select super definition and that will then hold your settings other problems can be how your getting data to your recorder to router …. Is it direct cable or a Wi-Fi device
  8. tomcctv

    POE cameras

    Hi not all recorders or switches have POE so a 12v power supply can be used instead
  9. tomcctv

    Help with AXIS A8105-E

    Hi $40 it’s a good option …… keeps your camera recording to the SD card …. So also a good backup option while no power
  10. tomcctv

    Help with AXIS A8105-E

    Hi this will have nothing to do with vms many cameras that go to default are not the settings you need …. I am surprised for that money the axis has no battery backup i had a problem like yours on another brand of camera …… no volume or home save on a ptz depending on the time your camera is down a ups supply might be a better option for you and not for a lot of money this is similar to what I used https://powerwalker.com/product/10120450/
  11. tomcctv

    westshine nvr/dvr question

    Westshine don’t make recorders they only rebadge them xmeye or avtech they use 90% of them xmeye this is todays code …. Runs out at midnight case sensitive HCzyku9136
  12. Password reset changes at midnight u6d4z20 case sensitive but I guess you don’t have patience to wait for a reply
  13. Hi then it’s not compatible with your nvr it was first produced in 2012 I will PM you
  14. Hi …. I was up there last week ardrossan it looks like your using the old hik (2012) your new camera is not compatible as is out of the box ……. You will need to connecting to a computer and alter its settings out of the box it is h265 and 5mp you need to set to h264 and either 1080p or 720p for it to show on your nvr so in reality it’s pointless running a camera you have to downgrade the settings on is this for home or business use ?
  15. Hi can you check the nvr product number ??? does yours have a DVD hard drive fitted ? we’re are you based
×