Jump to content

SAJEEL

Members
  • Content Count

    46
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. SAJEEL

    Pelco dvr 5100

    no one ?
  2. Hi, have pelco dx8100 setup on static ip with remote client working fine on pc, has anyone been able to connect to a mobile client and what software have they used ? Thanks in advance
  3. SAJEEL

    Pelco dvr 5100

    Hi there, Need some help again, i have a pelco 5100 dvr setup need to have remote viewing on pc and (mobile as well if possible). The customer seems to think it can be done on mobile although i am not so sure. From what i have gathered there is 2 connection methods, secure using a vpn connection which is endura network, and un secure the stand alone method. I have the wan ip, ip of dvr and remote key for software, i also have putty to ssh but cannot connect. I believe the software uses port 27235 but am not 100% on this, dont have any idea of port used for SSH I want to connect using remote client and normally i open the relevant ports on router and forward to dvr, install remote client and done. However on this dvr there is no where to choose port numbers, i will be using a dns resolver as they have dyanmic wan ip address. I am sure someone on here has setup these before and is able to help, thanks in advance.
  4. SAJEEL

    10 pin connector help

    RJ50 is the one looking for. This is serial connection for power and ptz controls.
  5. Hi, Am looking to purchase 10 Pin RJ45 connector in the uk to wire up pelco ip cctv, but can only find one supplier; http://itm-components.co.uk/products/plug-rj4510x10rnd-cbl-100pk?utm_medium=cpc&utm_source=googlepla&gclid=CLvF1Yflg80CFbYV0wod7eYFHg Please let me know where you get yours from along with tool to crimp these ? Many thanks in advance.
  6. SAJEEL

    WiFi and DVR/NVR

    the best option would be a mains power network adaptor, however this will not work if the socket ring is on different circuits, the other way is to use wireless-n ethernet bridge however there will a loss if you are too far from router, you did not mention distance from router as this will help offer solutions.
  7. SAJEEL

    ip camera on tv

    Thanks, do i download viewer app from play store ?
  8. SAJEEL

    ip camera on tv

    Hi, Anyone had any success on linking ip cameras to tv apart from using a pc or laptop connected to tv ? Any suggestions or ideas would be much appreciated
  9. SAJEEL

    cctv multichannel setup

    Thanks for replies, i decided to use a 16ch dvr as cost of 16ch multiplexer is almost the same, so i will remove 8ch dvr and 16ch then split outputs.
  10. SAJEEL

    cctv multichannel setup

    I have 3 dvr's 1= 8ch, 2=4ch 3=4ch They need to view all 16 cameras over 2 monitors and add a additional 2 monitor / tv to 1st floor. My solution is a muliplexer on dvr 1 and 2 output and feed 2 monitors by splitting output. Then take one more wire on dvr 3 to first floor and feed the other monitor. This way they have identical view upstairs / downstairs. I can use split screen or sequence to view 12 cameras. Any suggestions or better way to do this are welcomed ? Thanks in advance.
  11. You need to know what port the application is using and then open that open that open on your router. this site will help you http://portforward.com/default.htm Then sign up for a dyndns account here http://www.noip.com/ you will install the client on pc on same network as dvr. If the dvr supports dyndns then you can enter details into dvr. Once all is done switch wifi off on mobile and test. An example of you address is http://homedvr.noip.com:1824 If your still stuck message me
  12. SAJEEL

    remote viewing help

    yeh all set its been a long time since i spoke to you, keeping busy out there with cctv work ?
  13. SAJEEL

    remote viewing help

    Hi Tom Good to see you still on the forum
  14. SAJEEL

    dvr cannot be viewed remotely

    sound like there is a lag in your broadband connection you can perform speedtest, http://speedtest.net/ make sure pc is in idle mode, no downloads or uploads. If you can connect to dvr but timesout then you have problem with connection, revert back to old isp or choose another isp, by the way what isp are you currently with.
  15. if you post model and make of dvr i will try to help, in the settings of dvy most have different settings as well as h.264.
×