Jump to content

bass1175

Members
  • Content Count

    10
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral

Converted

  1. Guys I need your help here, this system isnt for me, the customer like everyone else is comparing with Costco. I dont want Costco for two reasons, its 15fps and not sure if this can be upgraded to 20fps and the NVR only has 8 ports POE. However, any vendor I have tried, wants $1900 for this system and the customer prefers to save the $400 over an extra 5fps and get get a $40 POE switch. Plus Costco has a no hassle return policy, which most reputable vendors do. Can you recommend someone that can do this system for $1500 or close, with an NVR that has 16 POE and the cameras are 20FPS. All in Hikvision. That also includes a 3TB HD. This would make it worth not going with the costco set. Or I can get the $600 NVR POE on all 16ch and pickup the cams off of ebay. Costco comes with 8 3mp cams, 16ch NVR, 8 POE, 8 100' cables and 1 6' cable. 3TB HD. support/warranty. Also how 80 differs from 160MBPS for incoming bandwidth. Not exactly sure what these limits are for. Looking at this NVR DS-7732NI-SP/16 and comparing it with the 16ch. If anyone can offer this package please contact me. Whats your thoughts here?
  2. bass1175

    Resetting password on Dahua 8ch DVR

    was able to get in, was putting admin as the user then 888888, as mentioned above the user and pass are both 888888. With that said the one outdoor Dahau camera they were after had failed with no data to retrieve for the incident.
  3. bass1175

    Resetting password on Dahua 8ch DVR

    Thank you plus, I just realized we were entering admin for username with password 888888, then seen another thread where the user and pass are both 888888. So will try that today, thanks again.
  4. User forgot the pass and need to reset the password, will removing the internal battery work or only wasting time? Any advise is appreciated. pic
  5. Updating my own post in hopes to help others in the future. For security and protection reasons, you cannot access a lorex system with the default password over WAN (externally). changed the default password and all is well.
  6. Ok its not what you think, I can get access externally to the DVR but always get login failed. Same credentials are fine over local ip, and its not a port issue as I'm accessing the DVR. I called tech support and they said to try port 85 instead of 80, but I cant make sense of this as I have access to the DVR. This is a strange setup to me as they are Digital cameras going over BNC connection rather then what one would normally see using POE. The tech was even surprised of the problem and this kind of system being digital over an analog setup. Appreciate any ideas to try.
  7. bass1175

    Nanny cam

    Sj1000 http://www.youtube.com/watch?v=-Z8Nh_KdBcg
  8. bass1175

    Nanny cam

    Yea I worry about the motion detecting as well, if not I will let it continuous record, all I need is 10 hours.
  9. bass1175

    Nanny cam

    Lots of outdated and overpriced products and all on ebay but appreciate your help. I settled for the sj1000, great size, image quality beats many cams I seen for security, takes constant power, just hope the motion detection works well and it does run while connected. Have to rig something that can fit this things inside which shouldnt be too hard. All for $79 Heres a video on it, feel free to give your input, check out the image quality on this thing.
  10. bass1175

    Nanny cam

    Currently looking for a good nanny cam and having a difficult time getting what Iam looking for. I cant find any that run on constant power, for some odd reason. The ones I found have to be unplugged to work. ( Alarm clock cam) also a plus to be 1080p, h.264, 64gb, widest angle possible. These specs are not so easy to find. If anyone can recommend something descent please do so. Many many thanks.
×