Jump to content

Nelix

Members
  • Content Count

    16
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. I have a Vista NPX/KBD/J3De keyboard/Joystick to operate a PTZ dome camera and am looking for a manual for the keyboard. I need to see if there is a calibration process or a menu system on the keyboard as recently, as soon as I select the dome camera, the camera starts to move slowly in a very small step sequence, I have no tours or presets configured as that was my first thought. it I unplug the keyboard in-between the step movements then it stops moving, if I plug the keyboard back in it remains stationary until I select the camera again. I'm hoping I can calibrate the joystick it stop this from happening. I can still move the camera and zoom in/out as normal but if I stop the camera to watch something it continues with these small step movements which means I have to keep adjusting the camera, which is annoying and inconvenient. in order to move the camera to watch a scene I have to unplug the keyboard so it doesn't wonder off. Cheers
  2. Duplicate thread, please do not reply to this thread, user the other one int he forum with the same title. Admins, please accept my apologies, please remove this thread.
  3. Hi I have a Hikvision 7204 DVR. The DVR has RS485 outputs on the rear, I also have a Vista NPX/KBD/J3De keyboard/joystick controller that operates my PTZ camera (also Vista). I would like to be able to operate the PTZ features of the camera via the DVR as well as the Joystick. I know that it is possible to connect multiple joysticks together and the joystick has 2 RJ45 ports on the back, 1 is not currently in use and the other is plugged into an RJ45 breakout box which then goes off to the PTX cam. I have tried connecting the DVR to the free RJ45 on the back of the keyboard but this did not work, I have also tried wiring it straight into the breakout box and this also did not work. Where might I be going wrong here? I have checked the Protocol settings and address's of all the device and they are set correctly. Any help would be greatly appreciated. Kind Regards Nelix
  4. Hi I have a Hikvision 7204 DVR. The DVR has RS485 outputs on the rear, I also have a Vista NPX/KBD/J3De keyboard/joystick controller that operates my PTZ camera (also Vista). I would like to be able to operate the PTZ features of the camera via the DVR as well as the Joystick. I know that it is possible to connect multiple joysticks together and the joystick has 2 RJ45 ports on the back, 1 is not currently in use and the other is plugged into an RJ45 breakout box which then goes off to the PTX cam. I have tried connecting the DVR to the free RJ45 on the back of the keyboard but this did not work, I have also tried wiring it straight into the breakout box and this also did not work. Where might I be going wrong here? I have checked the Protocol settings and address's of all the device and they are set correctly. Any help would be greatly appreciated. Kind Regards Nelix
  5. Hi All I have a bit of a situation here. I have a client who has the above DVR installed, this was inherited with the system that was already in place when they took up residence. They have had a burglary and require the footage from the CCTV but they do not know the password. Is there a way to reset the password without losing the footage or is it possible to remove the HDD and install it in a PC as a secondary drive to retrieve the data? Cheers Nelix
  6. Hi all I'm looking for a bit of advice. I am working on a little project, just as a "something to try" type of thing. I have several Sony EX480 camera modules and was wondering if there is any way to utilise them without having to have a dome housing as I want to try and make this as small as possible. Is there such a thing as a housing that has the ribbon cables included that could be used. I have seen these type of cameras: http://image.so.com/v?src=360baike_sidepicmore&q=SONY%20FCB%20EX480CP&fromurl=http%3A%2F%2Fwww.vcn.com.cn%2Fsupplys%2Fdetail-42602.shtml#multiple=0&dataindex=2&id=da07fdb5770b7ff477e445ae829eeb47 And was wondering if anyone know if they can be purchased without the actual module as I already have them. I am then looking to use an IR filter on the camera and an IR illuminator to have a play with ANPR. I also need to know how I can set the shutter speed on the camera for ANPR use as a high shutter speed is needed. Has anyone done this or similar before, seems a shame to buy dedicated equipment when I could possibly utilise what I already have. Hope someone can help. Cheers Nelix
  7. Hi, I have posted this thread else where on this forum but I think I posted it in the wrong place so did not get any responses so thought I would try here. Sorry if this means I am duplicating posts, the admins can feel free to remove the old post if need be. I have a question regarding PTZ. I currently have a Vista Dome with EX480P camera installed that is being controlled by a vista NPX/KBD/J3De keyboard, it all work very well into a PCI card in a PC. I have recently purchased a HikVision DVR (DS-7104 HGHI-SH) so that I don't need to have a PC switched on 24/7 to record footage. The DVR has RS-485 connection (2 off, D+ & D-). I am trying to get both the keyboard and the DVR to be able to PTZ, mainly so I can use the keyboard when at home and utilise the PTZ of the DVR when away. I know the keyboard Baud Rate is 19200 as it displays it when powered up and I know the Camera address is 001 as I can retrieve this information from the camera menus but I don't know the Data Bit, Stop Bit, Parity or Flow Control information. I also believe the protocol to be Pelco D but cannot be 100% sure. What's the best way to get these working together? I hope someone can help. Kind Regards Nelix
  8. Nelix

    PTZ settings

    I'm beginning to think that this is not even possible, please correct me if I am wrong.
  9. Nelix

    PTZ settings

    Hi all I have a question regarding PTZ. I currently have a Vista Dome with EX480P camera installed that is being controlled by a vista NPX/KBD/J3De keyboard, it all work very well. I have recently purchased a HikVision DVR so that I don't need to have a PC switched on 24/7 to record footage. The DVR has RS-485 connection (2 off, D+ & D-). I am trying to get both the keyboard and the DVR to be able to PTZ, mainly so I can use the keyboard when at home and utilise the PTZ of the DVR when away. I know the keyboard Baud Rate is 1922 as it displays it when powered up and I know the Camera address is 001 as I can retrieve this information from the camera menus but I don't know the Data Bit, Stop Bit, Parity or Flow Control information. I also believe the protocol to be Pelco D but cannot be 100% sure. What's the best way to get these working together? I hope someone can help. Kind Regards Nelix
  10. Nelix

    AVTECH DVR & RS485

    Hi Scorpion I have tried pasting the link into my browser anbut it does not work. It takes me to a office live page but access is denied. Regards Nelix
  11. Nelix

    DDNS on Avtech DVR

    There is a piece of client software available free of charge from the dynDNS website that sits in the taksbar that will automatically update your dyndns account when your IP changes. Regards Nelix
  12. I agree, more info required, what IP's are you using externally and internally, what happens when you try to connect and it fails i.e. error messages/404 errors etc. Regards Nelix
  13. Nelix

    Hello All

    Hi there I'm new to the forum........Doh! obviously otherwise I wouldn't be posting in here Already made a couple of posts and am awaiting responses. I'm not a CCTV buff by a long straw, I'm an IT Man. Just wanted some general advice before installing camaras around the outside of my house.
  14. Do you have internet connectivity from this machine?
  15. Nelix

    AVTECH Support

    Hi all Does anyone know of a uk site that provide support for the AVTECH AVC785D. I'm looking for firmware updates, the current firmware is as follows: 2040-10-M3-04-AA-14 Kind Regards Nelix
×