njinstallation

bosch dome cameras, 2.5 amp 24v psu the problem started when i added 1 camera used cat 5 for power , i will swap this out for flex and see what happens.

samsung have got a good range of kit out for this , not to expensive to

no 2 power supplies but even if i attach 2 that are of 1 psu i get 1 good picture and 1 with coloured lines on it ?

ive got a 4 way avtech, with 4 cams, was working ok untill i added a fourth camera, now 2 of the cameras have got coloured lines going through them, when i diconnect all the cameras they are ok when only one is connected any ideas

cant be ip address as i can still access the dvr, just shows a blank screen when you try and view video,

hi installed a 4way avtech dvr was working ok, but now cant see live images over net , but can still the recorded files. any one else had this problem

hi ive got similer problem, am using a thompson st510 modem and a cnm dvr, ive fitted an netgear router inbetween and can get the dvr and internet on lan, but cant get the dvr to work over the net, am using a dyndns account i would be grateful if anyone may no what to do

hi ive got 4 channel cnm dvr, works over internet fine, but cant find an app to open it on iphone someone said dmss app , this connects but wont show any video , has anyone else got a way of viewing over iphone thanks

have you wired them as 485, or biphase i had similiar problem when i used 485, when it started spinning i just turned camera other way and they have been ok since

hi check data is right way round going to encoder, also check protocol you have selected in encoder