compuexpert

This is a digiflower card,google it and you'll find something.

thanks alopu. Where are the guys of netvision anyway?

Any news on the dvr's?

There's an option to "check primary" and "change to rgb" under the "dx setting". Play with those settings and also try to lower resolution.

Anyone know the difference between them?Are they both stackable? I need to make a 32 channel realtime system and thinking of testing the hikvision cards.

I would check the power supply,go to bios in system "health monitor" or something and check the voltages,also check the temperatures. Also check the memory timings with everest and put them manual in bios.

Try downloading the kd-net software 2.50.16

How many meters it should be? I have used upto 10m with no problem at all. Check this link: hXXp://www.equip-info.de/english/index.php?main=10&gruppe=400&prod=842&article=118854&pagenum=2

Most of the dvr cards prefer ATI chips and the quality most of the times is better.Their flashy logo is a good reason to use them also I've been using nforce2&3 mobos with radeon cards with great success so far.No compatibility issues at all,even the speed of the dvr cards was better than intel systems in some cases. I prefer using amd systems cause of the low temperatures,so i'll better figure this out or i'll have to turn to intel systems.

I know rory,i came across on of these a couple of years ago,and it took me some time to figure out the id/pass.

Rory how about the id & the password to start the software?

Well, on an nforce3 computer with any agp radeon card the client software is working great. On an nforce4 computer with pci express any radeon i tested, didn't work. Also i tested every single version of eyemax,isis & magic radar without success. Is it an nforce4 incompatibility or a pci express? I'll find out as soon as i get one intel mobo.

I have a new version 16 channel isis dvr card working great with 4.2software,but cannot see the cameras on remote client,after replacing the remote computer. It has something to do with the ati drivers cause when i unistall them its working.When i install them i connect ok but all i get is black windows. Using IE it's working ok with no problem at all. Anyone with similar problem?I tried changing all catalyst options without result.

It looks similar to this: http://www.thakral-it.com/en/cpxx.asp?idd=216 Contact them to send you the software.

It's digiflower board.