Leohuangdi

Hi, Avtech dvrs event timer is usually just for recordings, so when an allarm is triggered outside of the selected time it will not record the video, but it will still send email notification. Recently a new firmware (1022) was released to improve this function in some new models of dvrs, can you check what is your current firmware version?

Hi, Interesting the issue of Playback, since the dvr is working well with version 1032 there is no need to change. To solve problem of motion during night.....i would keep playing with sensivity, till you get some motion icon on the screen........ If motion icon never appears, chech on "timer record" if motion recording is active, and the timer is activated for the night (or just deactivate the timer function). Let me know what is the result Leo

Here is the manufacturer Firmware: ftp://211.75.84.102/Firmware/KPD675C_1013.rar Leo

Hi, I think that probably you only need to change the sensivity of motion detection. Wait when it's dark, and do some test to fint the better sensivity level for the detection. Leo

It depends of the settings you choosen for your user account. you can modify you current user (default: admin) and select life time: Infinite. Leo

This is the last one i have for KPD679ZB: ftp://211.75.84.102/Firmware/KPD679B_1015.rar Leo

need to type the port number in Services...... IP adress in Firewall rules

If you tell me which brand of router are you using, i can prepare some instructions for you. But, if you only have this dvr, probably can keep the default port 80, without the need to do portforwarding. Most important, is to select the right network connection on dvr, and activate the ddns if you don't have a static ip. Leo

Hi Miyagi, How to do the port forwarding depends of your router. Need to enter the configuration menu of the router and enable a port for your dvr. Usually you can do that in "port forwarding" or "virtual server" area. You write the local ip of your dvr and select the port or port range. Leo

rtsp://IP:port/live/MJPEG htp://IP:Port/cgi-bin/guest/Video.cgi?media=MJPEG

Hi, Are you sure about the model number? AVC777. i don't remember it. Usually cannot delete the last available account, probably you changed the account and forgot user or password. Check the firmware version, maybe need to be upgraded. Leo

ftp://211.75.84.102/Firmware/KPD679_1025.rar But i don't think it can help to solve the problem. Leo

This is the last version of firmware, if you want to upgrade connect to the device by videoviewer, click on the last icon on the bottom-right, load all the files and start upgrade. When upgrade is complete the dvr will restart. Don't turn off the computer or the dvr during the process. ftp://211.75.84.102/Firmware/KPD674B_1015.rar Leo

To lower the motion triggers, for the bugs, you should change the sensivity of the camera, there are different sesivity depending of the space, the time or the change of the whole image. Low them till you get the best configuration. you can use firefox and chrome to see live view and event, you only need to keep updated quicktime. On iphone, go on the ip adress list page, press the last icon in the right bottom, then press the ip of your device, you should find the videos recorded (of course you need one hard disk in your dvr). If you have some problem with the browser, can try to upgrade the firmware of the dvr. Leo

Hi, I think that your network settings are already ok: Select DHCP connection, do port forwarding, turn on ddns function. Avtech server is the "default" one, and the MAC adress is the ddns adress, but of course you can change that name with one easier to remember. The email, is just to receive confirmation. The model should be KPD674B, check if you have both vga and crt output simultaneally. Probably you cannot see live view because you cannot download the active-x. Go to the internet settings and allow download of all kind of active x. If it's too complicated, just try this software: https://docs.google.com/open?id=0B_Tf3Yb1yhhRNTZkY2I3OTYtZmYwMy00MWJhLTkyYWYtOGRmZGU4YWZkMDA1 Leo