Jump to content

CCTV Design

Members
  • Content Count

    17
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. CCTV Design

    Who _really_ makes this mobile DVR?

    If you can find the true manufacturer, they will not deal with you for less than 10 units anyway. More likely 50+
  2. CCTV Design

    What Would You Say to This Guy?

    The camera is tight enough but obviously needs to be looking a little higher. However the resolution of the DVR or NVR is crap and will never give a good image.
  3. CCTV Design

    DVR Password Reset

    This advise is without any support if you break it. Open the DVR (powered down), remove the battery that holds the BIOS. If there is a super cap, short it out. This can sometimes cause a clean restart.
  4. CCTV Design

    Webservice 2.0 question

    Im not exactly sure what you are asking but if you use an IP camera or DVR that can send a JPG image, you can easily do this with a script on the page. Just FTP the images to the web server from the camera and then load them. I have written software to do time lapse recording via this method. Tim Norton
  5. CCTV Design

    Newbie from the Philippines

    Where do you live and what would you like to learn?
  6. CCTV Design

    Who _really_ makes this mobile DVR?

    Chances are neither are the original brand. The practice of OEM allows Asian manufactures to sell much larger volumes by branding them for multiple companies. While the product may be OK, the support on this kind of sales is often 0 If you buy from a recognised name (a manufacturer) it will often cost more but you will get on going support. Tim Norton
  7. CCTV Design

    newbie from singapore

    Ask questions and you will learn much
  8. CCTV Design

    New guy from Mexico

    Welcome, I would love to offer you some support as I have 23 years experience in this industry. Follow the link in my profile for a source of information and post questions. Tim Norton
  9. CCTV Design

    PTZ presets

    Not in any PTZ I have ever used. What is the brand & model? Tim Norton
  10. CCTV Design

    instalation great distance

    800m on cat5 UTP is a long way and I suspect the voltage drop you are getting on this cable is going to be too much. If you have a multimeter, measure the voltage at the camera when it is meant to be running. If it is lse that 11.5 volts, that is the problem. Because you have 2 nice IR lights and the camera to power up, UTP is not a good option. Can you move the power closer to the camera and only use the UTP for the video? Tim Norton
  11. CCTV Design

    CCTV installers

    I'm not an installed but have been in the past. I now spend my life as a consultant giving advice based on 23 years in this industry. Anything I can help with ? Tim Norton
  12. In short No. You can use a Mobotix camera on a 3rd party VMS along with other cameras. Common VMS brands that accept most cameras are Genetec and Milestone Tim Norton
  13. CCTV Design

    DVR help needed please!

    You typically need to setup a port forward of the ADSL router to be able to access it from outside the LAN. Do you have access to the router config pages? Tim Norton
  14. CCTV Design

    New from NY ^^

    Welcome NY from Australia Tim Norton
  15. CCTV Design

    Hi newbie here!

    Hello and welcome. There is a lot of knowledge both here and on the users web sites. Please let me know if I can assist you Tim Norton
×