Tempest

Thanks for that... I wen't through and it seemed to work, but My Firmware version seems to still be the same? 1008-1004-1004-1001? System successfully reboots etc, but no update?

Thanks for that, how do I upgrade the firmware? Do you have a link to the Firmware and the installer or how is it done? Again, the user manual it came with is not very good and appears to be missing something. Thanks.

Thanks for that, all seems to be ok now (my work internet seems to block it, but all other connections let me access Video Viewer/through IE). Just 2 questions... I am having a lot of Motion triggers from bugs etc that are attracted to the IR lights... What would detection would I turn down to prevent bugs from triggering it? And is there a way to view triggered events from an iPhone and from FireFox/Google Chrome? Internet Explorer is horrible... Thanks in advance.

Thanks for the reply, What settings do I use (or is there a better guide you can link me?) for the Network/DNS Settings? How do I select or enable the free AVtTech one? also, do you have a link to the AvTech Branded version of my device, so I know exactly what it is and can update firmware etc in the future? I just noticed I do have DDNS - "on" - System Name "Default" - Host Name is the MAC Address - email is blank.... When I connect to IE, I do use the IP address and :88 for the Port. I CAN connect, I just can't view video.

Sorry and just to add to this... I haven't used a DNS and while technically I don't have a "static IP" my IP address has been the same for over a year, and only seems to change if I power down my Modem for at least an hour. My ISP doesn't tend to change my IP address. I was able to assign the DVR as a permanent DHCP Client in my router, so thought this was the best way to do it?

Hi, Thank you for the response! Network is set up (hopefully correctly, the book didn't come with any Network set up advice) with the following. Let me know if you need full details and perhaps I can private it to you, and you can let me know where I am wrong?: DHCP IP: 192.168.xxx.xxx (the internal IP assigned by my router) Gateway 192.168.00.000 (this is a different IP address then the above in the same range. Is this correct?) Netmask 255.255.255.000 Primary DNS 168.095.xxx.xxx Secondary DNS 139.175.xxx.xxx Port: 88 I have a Dlink DIR-655 and have use the "Virtual server" setting to port forward as I found another guide recommending this as the best option. Thanks again for your help. Like I mentioned, I can live stream to iPhone app, but not to IE, Firefox or Chrome. I am connected to the internet and not using a firewall for the test. If I go into "Playback" and click "motion" there are no motion events even though I have received 20+ Motion trigger emails...

Hi guys, I recently bought a 4 Channel DVR package from Jaycar and have through some fumbling, googling and searching here have managed to get it working for the most part but still having a few issues. The "user manual" it came with is a joke, and really doesn't give any real set up guidance and there is no website or support email that I can find anyway. I actually seem to have found another user on here that has the same package a "QV-8104" by "Signet"... My Firmware Version is: 1008-1004-1004-1001 From everything I am seeing (comes with Video viewer", had a page on Eagleeyes app, the web log in appears to be the same as other AVTech devices people have had screen shots of on here), it appears to be a re branded AVtech device... Can anyone confirm if this is correct or if they know who supports it? Problems... 1) I can view live footage from my Eagle eyes app using 3G... Anyone know of a way to view other recorded footage, or video from motion triggered events? (I did buy the "pro" version) Also, do you know if this device supports "Push" to this app? 2) I can't seem to get Video Viewer to connect outside of the network... I get a "Connection Error"... It does recognize the device type (DVR [4 CH]). 3) I can log in using the Web access but I cannot view Live or playback footage... I have the same problem as Barjammar from this thread at the very bottom, I get the Trigger Alert email, but when I try to save the .avc file I get a Playback error (ErrorNo:0) http://www.cctvforum.com/viewtopic.php?f=3&t=23400&p=139927&hilit=cannot+view+Trigger#p139927 Any help would be greatly appreciated!