Jump to content

ferguson

Members
  • Content Count

    13
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Hello i have a spare roll of cat 6e cable sitting in my garage and am wondering can any body tell me if this TP-link POE switch will work using cat 6e cable? and also is cat 6e is ok to run ip cameras on? http://www.pcworld.co.uk/gbuk/networking/networking/wired-networking/tp-link-tl-sf1008p-8-port-ethernet-switch-10024572-pdt.html#cat-0 Thanks for your help
  2. Thanks i will try that, can you use a ptz camera with the switch?
  3. Yes, you can attach a switch at the camera end and then run shorter cables to each camera....thats the beauty of ip cameras...if the cameras are POE then you will need a poe switch... Thank you for your reply, Does it matter if the nvr has POE built in?
  4. Hello, Am new to ip cameras and am wondering is it possible to run more than one ip camera over a cat6 cable? as i dont want to run individual cables to each camera as they are very far away from the nvr Thanks for your time and help
  5. ferguson

    Which NVR would you pick

    Thanks for your reply the first one says that it is a Hd Hybrid nvr dvr ? Am not sure what cameras prob just 2 or 3 mega pixel dome cameras and i would like to ad a ptz camera in the future were would you suggest i get a cheaper nvr thats as good of quality? Thanks
  6. ferguson

    Which NVR would you pick

    Hello i am looking to buy an nvr that will use ip cameras and am wondering which one of these nvr's would you say is best or if you know were i could get a better one Thanks for your time http://www.equicom.ie/8-channel-hd-dvr-recorder-879-p.asp http://www.ebay.co.uk/itm/2TB-8CH-HIKVISION-NVR-8POE-HDMI-5MP-3MP-1080P-HD-CCTV-UK-MODEL-DS-7608NI-SE-P-8-/251833442379?pt=LH_DefaultDomain_3&hash=item3aa271604b
  7. ferguson

    cctv network setup Help please

    The thing is i have more than one router on my network which is probably making things more difficult this is a picture of my setup
  8. ferguson

    cctv network setup Help please

    The router seems to support No-ip but the cctv dvr doesnt. if i log into the router there is a setting dynamic dns which i can set to no-ip. see this link here http://www.tp-link.com/en/article/?faqid=419 is this any help to me? would that give me a static ip address Thanks
  9. ferguson

    cctv network setup Help please

    Thanks for your reply, there only seems to be 3 settings you can choose for this either 3322, dyndns, or perfect eyes ?
  10. Hello, i am trying to connect my CnM 4 Channel H.264 DVR Unit to the internet but having no luck and wondering is there anybody on here could help me. would be very grateful my router which the dvr is connect to with the cat5 cable is a tp link TL-WR841N which i have changed the ip address to 192.168.0.2 in the DVR i set the following under network settings too TYPE - STATIC MEDIA PORT - 9000 WEB PORT - 80 IP ADDRESS - 192.168.0.100 NETMASK - 255.255.255.0 GATEWAY - 192.168.0.2 DNS - 192.168.0.2 i have set up an account with no-ip and filled out the following ddns settings as i believe the router hasn't got a static ip address DDNS SETTINGS - TURNED ON SERVIVE - not sure what to put here HOST NAME - fergusoncamera.no-ip.biz USERNAME - iferguson PASSWORD - ******** i also changed the router settings to allow port forwarding on 80, 9000, 100, and 443 Look forward to your reply's Thanks
  11. Moved question to different section, thanks http://www.cctvforum.com/viewtopic.php?f=12&t=40176
  12. Hello i am thinking on buying a hd-sdi system but am wondering is it possible to run 4 sdi camera signals down one cat5 with a four way bnc to cat5 splitter? or is there any other cable i could run four signals down? as i only want to run one cable, the distance would be about 50m! or would it be best to go for an ip system and run all cat 5 cables? the setup would be similar to this in the link below http://www.cctvcamerapros.com/4-Channel-Video-Transmitter-p/balun-4phub.htm Thanks
  13. Am installing a 4 camera night vision cctv kit at my home, and am wondering what type of cable would be best to buy for this? One of the cameras needs a 50 meter (164 feet) cable from the dvr unit and the other around 70 meters (196 feet). the cameras are 12v and i am hoping to power them from the dvr unit as there is no power near the cameras, so was thinking on RG59 18/2 shotgun cable! So i am wondering would this be the right choice and be able to run the 12v power and video signal that distance? Thanks
×