Jump to content

wkdwrx

Members
  • Content Count

    51
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. wkdwrx

    cameras getting power but no video

    thrres about 10 cameras that do it turn on have power leds work the circutboard gets warm but no video oh and 1 camera works perfect but the menu is stuck on I have swap a lead over from another dome camera and did nothing when puh the little control up and down nothing happens its just stuk on\ but lets focus on the other problem first getting power and no video
  2. wkdwrx

    cameras getting power but no video

    now how do a replace a bnc on camera end ? I thought there were the same as bnc leads get rg59 cable but they are not its a yellow wire and a black wire or do I need one of these in pic
  3. wkdwrx

    cameras getting power but no video

    yes I hook one up the camera board gets warm
  4. wkdwrx

    cameras getting power but no video

    Camera Specifications: •Image Sensor 1/3" Sony Super HAD CCD2 •Lens Size 2.8 - 12mm •System PAL •Valid Image 976(H) x 582(V) •Resolution (Horizontal) 700TV Line •LED 21pcs •IR Irradiation Distance 20m •Video Connection BNC •Video Output 1.0V(p-p)(75 Ohm, Negative) •S/N Ratio >52dB •Minimum Illumination 0.001Lux/F1.2 •Electronic Shutter 1/50~1/100,000sec •Operating Temperature -10ºC to +50ºC, RH 95% Max •Input Power 12V DC ( ± 10%) / 350mA •Dimensions Diameter 127(W) x 127(D) x 95(H)
  5. wkdwrx

    cameras getting power but no video

    I have a test monitor but no multimeter im buying one on the weekend as I work nights and sleep days
  6. hi thanks for reading this just a few questions . I was given some cameras cause they are faulty . theres a few dome and a few bullet . the domes have leds and same as bullets. the problem is they are faulty . he said they may be fixable .now when connect power and connect the bnc there is no picture . but if put your finger over the ir the leds turn on so there is power going to the cameras . could it possibly be dodgey bnc ends on the camera ? I have pulled a couple of the cameras apart unply and plug the connectors and still no video . any help or ideas would be excellent
  7. hi all I bought a few used cameras and in the box there a couple ip cameras all my cameras are analogue so I know I cant use it on my dvr I got told but am I able to hook up power to it and use the bnc plug and connect it to my tv just to see if works or cant do that ?
  8. wkdwrx

    ptz camera question

    hi all was just wondering if anyone has ever seen or used one of these ptz cameras what are they like ect
  9. wkdwrx

    ground loop isolator question

    I don't need one I was asking how do you hook them up as it was a question I seen them but was curious as to if goes to camera end or dvr end or does it matter what end .
  10. hi all just a quick question as I have said once before im new to the cctv scene slowly learning more. question about the ground loop isolator does it go from the back of dvr to the camera bnc lead or the lead from the camera then bnc lead ? or can you hook it up anyway ?
  11. ok I had the sparky come back over I got him to put a new fan switch on the wall and try that did nothing . I bought one of the ferrite rings and did nothing . its weird only does it when view it on hdmi on tv in room cause as said above from the recorder to wall place have the hdmi and bnc leads running under house drill hole in floor and connect both into back of wall plate . if use the bnc to tv its fine tuen fan on does nothing . then connect hdmi from wall plate to tv turn fan on black screen for a sec then speed 2 black screen for a sec . I got him to do it to see if the computer monitor under house does it when the tv does it . and no it don't the only thing the computer monitor did when he did it was topleft corner got a lil fuzzy when he turn the fan speeds
  12. its a ceiling fan and its a round switch . no dimmer no nothing just speed 1 2 3 off . and the wall plate is about 2m away from where the fan switch is
  13. and beside the hdmi on wall plate I have bnc . I ran a bnc to tv and don't cut out when turn fan on or or only hdmi does . weird very weird
  14. hi al I have a question for yous . all my dvr is under the house . I ran a hdmi lead under house and I dril a hole in floor where wall is and the hdmi lead plugs into the back of a wall plate . then a hdmi lead goes to tv . well the problem im having is when I turn the fan speed up or down its like the tv screen turns off and back on but the hdmi lead is nowhere near the fan switch . when its on dvd player it don't do it only when viewing the cameras on tv .
×