Jump to content

Dâniel Fraga

Members
  • Content Count

    69
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Dâniel Fraga

  • Birthday 07/18/1976
  1. Dâniel Fraga

    Dahua firmware

    The problem is I promised my vendor to not share it. I'll ask my vendor for it (I just asked because it could be faster here). Ps: If I could, I'd never use those official firmware. I wish we could have alternative firmwares like we have for routers, open source (like "Open Ip cam" is trying to do). It'd solve everyone's problems.
  2. Hi everyone! Yes, with lower resolution the problem is "solved".
  3. The Dahua HFW3200S camera shows artifacts when using the maximum resolution of 1080p@30fps. This seems to be caused by "sonia" and "VideoDaemon" binaries which are resource hungry and cause high load in the camera. See the video below. Firmware used: 20130726 It seems the software used in Dahua is very bad written. The workaround is to use a lower resolution.
  4. Dâniel Fraga

    Dahua firmware

    Has somebody got the 20130911 firmware?
  5. Does somebody here uses Dahua HFW3200S recording to FTP at 1080p? It seems this camera cannot do it without artifacts. I'm using the latest firmware (20130726). A workaround is to reduce the resolution, but I want to record it at 1080p (otherwise I wouldn't buy it .
  6. Dâniel Fraga

    Dahua firmware

    The latest Dahua firmware is 20130726? Or there is a newer one? Thanks.
  7. Yes, much better. RTSP is the correct protocol for streaming in this case. TCP is awful. Avoid TCP.
  8. I use RTSP Dahua support in IP Cam Viewer. Have you tried it?
  9. Dâniel Fraga

    Dahua firmware

    it is a ProFTPD server Check the AllowOverwrite directive. It must be outside the directory you're writing to. Just add: AllowOverwrite on to the end of proftpd.conf and it should work. I faced the same problem with Proftpd from DD-Wrt.
  10. Dâniel Fraga

    Dahua firmware

    Are you usind DD-Wrt's FTP server?
  11. I have the same camera and I can confirm this problem. No attachment at all.
  12. Dâniel Fraga

    Dahua firmware

    Hi, I still didn't try it because I don't have the values set to zero. Here it's what I get: "Region":[4194240,4194272,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303,4194303]}] The suggestion said to change this to 4294967295, but he uses a 3200S instead of a 2100 model. I'm talking to him at the other forum to try it in a safe way. Thanks.
  13. Dâniel Fraga

    Dahua firmware

    The newest firmware is 20130517, but use this just if you don't need FTP recording (it has a bug). If you need FTP recording, download the 20121031 firmware.
  14. Dâniel Fraga

    Dahua firmware

    Please send e-mail complaining about it to overseas@dahuatech.com or send it directly to Dahua engineers so they can fix it (I tried, but they said they couldn't detect the bug): qian_hongming@dahuatech.com alvin.dahua@gmail.com yang_zhongyu@dahuatech.com yu_jian1@dahuatech.com
  15. Does this Hikvision model supports a second stream with a lower resolution? What are the lower resolutions?
×