marek2123

Hi I have fitted a Swann NVR8-7300 and have the remote viewing set up on a PC and lap top along with an android phone. I had wrongly assumed that I could add this also to a Nokia Lumia Windows phone but this is not the case, should have done my full research first!. Does any one know if this is possible? Also the footage from the 3mp cameras are excellent in daytime but having just fitted an extra camera any moving image on night vision appears blurry, the settings appear as they should, can any recomend an alternative setting, this would be much appreciated. Sorry for being a noob but learning everyday

Hi, Hoping for some advice off the tech minded. I currently use a Swann DVR8-4200 - 8 Channel 960H 1TB DVR System with a mix of cameras from 700 to 1200tvl. I use Cat6 cable with RJ45 Balun w/Audio Video/Power and this works well. I use the Cat6 just because it was available and was hoping this would be future proof. I was looking to upgrade from a DVR to NVR and was looking at the Swann NVR8-7082 8 Channel 720p Network HD as this can be picked up for £199 off ebay, not ready for the full 1080p yet as pricy. Two questions, will I still be able to use my camera set up and upgrade gradually or will the cameras be incompatible? Also will this be able to supply POE to the existing set up over the cat 6 to the baluns or will I have to run a separate power which may outweigh the set up cost altogether. I tried looking but I cannot find a simple answer so any advice would be appreciated