Jump to content

Chris67

Members
 View Profile  See their activity

  • Content Count

    7

  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Chris67 started following Problem with Hikvision 2032 after firmware upgrade
  2. Chris67
    Here: http://www.ipcamtalk.com/showthread.php?1784-Hikvision-2532F-IS-not-getting-any-audio-through&p=20608&viewfull=1#post20608
  3. Chris67
    Yes, used TFTP with Chinese 5.2.5 and it showed up in SADP.
  4. Chris67
    Update: My camera is working again with firmware 5.2.5
  5. Chris67
    Yes The camera does not restart automatically after "system update completed". Tried versions from 5.0 to 5.2.3 several times with no luck. I have another camera from China under way, guess I'm not gonna do any firmware upgrade on that one
  6. Chris67
    Your first alternative was the FW I upgraded the camera via web browser first time. Tried it several time via tftp. No success with your second alternative either
  7. Chris67
    Yes, English firmware on Chinese camera. I tried several times. Same problem. Get this message when connect trough telnet if it's relevant:
  8. Chris67
    I have a Chinese Hikvision 2032 and after a firmware upgrade I have a problem. Used tftp to upgrade my camera. The camera didn't reboot after upgrade. I can ping and access the camera via telnet, but no access via web. After rebooting the camera I can't ping or telnet. It's just keep rebooting. Tried different firmware versions. Any solutions or is it bricked ?
×