Jump to content

chamac

Members
  • Content Count

    9
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Thanks PC. The cameras are 7 watts each so should work. Is that one a good choice or should I look at others?
  2. Thanks lads for your replies. So this would be better if I eventually had eight POE cameras? http://www.amazon.co.uk/Netgear-Gigabit-Smart-Switch-Fiber/dp/B003GOFIBS/ref=sr_1_1?s=computers&ie=UTF8&qid=1409251442&sr=1-1&keywords=8-Port+Gigabit+switch+POE Do the cameras all plug into the switch and the switch is plugged into one router port? I can easily enough run a cat5 cable to each camera. Getting the Avermedia streaming onto Blueiris would not be a huge concern as I intend Blueiris to take over with all IP cameras in the future. I have two fairly new analogue cams connected to the Aver card but suppose so I could fleabay the lot.
  3. Hi All I bought Blueiris as a basis to a new IP system to replace my failing Avermedia NVR5000 system. I have some wired POE IP cameras (5MP they claim..) coming. Obviously my WNDR3800 router has only four ports so am I right in figuring that I will need one of these to connect multiple cameras using cat5e http://www.amazon.co.uk/Netgear-Gigabit-Switch-Power-Ethernet/dp/B003GOFICC/ref=sr_1_1?s=computers&ie=UTF8&qid=1409231012&sr=1-1&keywords=16-Port+Gigabit+switch+POE Also, Is it possible to stream analogue cameras onto Blueiris from my Aver setup? Charlie, Ireland.
  4. chamac

    Averdigi i-phoneviewer app.

    Yep, Top app. Works very well. Looking forward (hopefully)to an address book to keep settings in version 2.
  5. chamac

    Averdigi i-phoneviewer app.

    Got it working with a little help from tech support. You have to enable the HandyViewer box in network settings. Use the latest software version too. Pity about the lack of address book and manual. Hopefully next version.
  6. chamac

    Averdigi i-phoneviewer app.

    Hi All Has anyone got the new Avermedia iphone viewer app. working? My NV5000 is viewable online via Dyndns so the ports etc. seem ok. I have tried various ports including the correct one 5550 on the app. settings. I get an error "Starting network failed" If I use port 80, I get live buttons but they do not work. Other ports show the buttons but they are not highlighted. Would a static IP be better? Upload speeds seem ok as the system works fine with webviewer. Any ideas? Thanks and happy new year to all. Charlie.
  7. chamac

    Which Aver card

    Thanks for your help Collin. Ordered two NV5000 today. Should give good frame rates with eight cams. Thanks for the help Great forum.
  8. chamac

    Which Aver card

    Do I need a second card to get the next four channels ? or can I get an extension? If so maybe the 6480E would be a better bet and be a little more future proof.
  9. chamac

    Which Aver card

    Ok, I have trawled the forums and decided that the card I need is an Avermedia. Problem is which one? Basically, I have a small business here in Ireland and need a max of eight cameras. I also have a boat that I intend watching with a wireless network camera probably from Axis. Being a relative newbie ( I own a Swann DVR4 net !) can I ask what is the difference between the NV5000 and the two NV7000 cards. One is the NV7000H and one does not have the H. Am I mistaking or can I network the wireless network camera on the boat with the other cams at work and watch the whole lot from the office? There is wifi where the boat is kept. Can someone suggest which card is best. They would all be inside my budget. Chamac
×