alessandrocolos

Try here ftp://ftp.wintel.fi/drivers/dahua/NVR-sw/NVR-3XXX/Ver2.616/

Anyone know that if Can I Put a PAL fw on a hfw2100P with ntsc without bircking it? Thanks

here you can find the firmware for 3x and 2x (it is the same) I tried it with 2100 & 3200S. it works fine ftp://ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX3(2)XXX/Ver2.212/General_IPC-HX3(2)XXX_Eng_P_V2.212.0001.0.R.20131224.zip

thank you I confirm you that General_IPC-HX5(4)XXX(SD-Adreia)_Eng_P_Stream3_V2.400.0000.0.R.20131231.bin works very well on hfw4300s! now it finally support mjpeg stream! http://ip:portgui/cgi-bin/snapshot.cgi new firmware NVR52xx 2.616 2014-01-10 works fine except: - tour and cycling channels are very bad (in cycling mode it shows even empty channels with black screen, not excludible) and very very poor customization, instead the previous fw was better under this aspect. - mjpeg stream http://ip:portgui/cgi-bin/snapshot.cgi?channel=X works for a few time and then it stops. then I have to reboot the nvr. with the new version 2.616 now I can set up all the cameras parameters via NVR, very very interesting feature!

I've seen that there is a new firmware version for 5x and 4x series of dahua ip cameras with a bunch of new features ftp://ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX5(4)XXX/IPC-Hx5(4)XX%20V2.4%20baseline%20feature.pdf I'm not able to find it… anyone has it?

Alessandrocolos can you please tell me the name and the size of the second .bin file with the language? Did you use the ConfigTool to upgrade the firmware? thanks a lot! the firmware file was 21.7 and "language" file was 20.7MB but both have .bin extension I don't know anything about your 32xx but have you tried to: reset do default settings; leave the internal battery for 1 minute and tried to upload the firmware? How do you upload the firmware to the nvr? you should put it in a usb key plug it in your nvr and then from MENU->INFO->VERSION->UPDATE you should start flashing procedure

I had a similar problem! My dahua vendor gave me 2 bin files to upload. the first was the firmware file, and after reboot I had to upload the second file with Italian language. This procedure was tested on nvr5216. you need a language file or a complete firmware that includes even language in order to clear the previous firmware

@maxIcon I've tested your General_IPC-HX3(2)XXX_Eng_P_V2.212.0000.0.R.20131206.zip and it works well apparently no difference with 201305xx version

Hi Everyone ! Does anyone have the latest firmware of dahua HFW4300 3MP? because the 2.210.0000.2.R, build : 2013-08-21 does not support direct JPG snapshot taken from http://IP:PORT/cgi-bin/snapshot.cgi Actually I have two HFW2100P and a HFW3200S with 2.212.0000.0.R, build : 2013-12-06 that support this stream. thank you Alessandro from Italy