Jump to content

CharlieB

Members
  • Content Count

    39
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. CharlieB

    Mini nvr questions

    As 5mp is going to be well above 1080p i would suggest lowering the camera resolution via a web interface before connecting to nvr
  2. CharlieB

    Mini nvr questions

    here is rtsp link http://www.urcctvstore.com/Download/20150808/Enable_RTSP_protocol_20150907.update nvr only works with h264 format and think old sricam use jpeg or mjpeg.
  3. CharlieB

    Mini nvr questions

    Default ip is 192.16.1.188 You only need to forward ports if accessing from remote location. If you have an android phone use fing to see if nvr is live on your network.
  4. CharlieB

    Mini nvr questions

    When i upgraded to the latest firmware both video outputs stopped working, loading screen would still show but disappear when camera views should have been displayed, downgrading firmware did not restore displays. Fixed by using Internet Explorer 192.168.1.188 as that is default unless you have changed it. Install active x control as prompted them reset via local settings.
  5. CharlieB

    Mini nvr questions

    got display back by using ie to reset all nvr defaults
  6. CharlieB

    Mini nvr questions

    Did anyone who lost video output after firmware update manage to resolve the issue ? if so how ? thanks
  7. CharlieB

    Mini nvr questions

    i used the wd drive recommended until it failed, have since used a different wd drive and also old laptop drive via esata.
  8. CharlieB

    Mini nvr questions

    Hi maara You need to change the stream (4x[1280x720]). This first part has to be equal or greater than the resolution of the cameras.
  9. CharlieB

    Mini nvr questions

    I use an esata cable with an extra usb lead build in for extra power and that works fine http://www.ebay.co.uk/itm/2-5-inch-Hard-Disk-Drive-HDD-SATA-22-Pin-to-eSATA-Data-USB-Power-Cable-50CM-ne-/181871840897?hash=item2a58680e81:g:OQ4AAOSwQTVV-M62
  10. CharlieB

    Mini nvr questions

    same issue all outputs dead
  11. CharlieB

    Mini nvr questions

    new firmware finally available at... http://www.urcctvstore.com/Download.html
  12. CharlieB

    Mini nvr questions

    Firmware you are after is available here http://www.unitoptek.com/?article=detail&id=133
  13. CharlieB

    Mini nvr questions

    ensure nvr port is forwarded in your router and mobile data is enabled in goolink app.
  14. CharlieB

    Mini nvr questions

    personally i would ditch using ie with nvr. nvr only works and not very well with ie and not with other browsers including w10 browser. in windows use free vms software that allows you to change settings and view streams from nvr. On android use goolink app. many hours have been wasted trying to use browsers when the alternatives are way better.
  15. CharlieB

    Mini nvr questions

    goolink site is working
×