Jump to content

spippolone

Members
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. spippolone

    DVR resolution Firmware update ?

    YES and in the picture the TV is connected directly on HDMI2 Port you can see in bottom.. on the grey line and the DVB was to set 1920X1080 you can see it in other picture.. YES sure if you connect the HDMI out from PC in a 1920X1080 you can see the picture perfectly on the TV connected to antenna cable. The problem is just that the modulator work to 1920X1080 only !!
  2. spippolone

    DVR resolution Firmware update ?

    Hi, thank you for your answer, my problem is this: I have a DTT modulator with HDMI input, it work fine with 1920X1080 but ho work with 1440X900 input. I have saw in the DVR menu 1920X1080 output video, it is selectable, (and selected) but the signal out recognized to the TV and also the DTT Modulator it is 1440X900, In attach the example... and with 1440X900 on the TV appair Service not avalaible. In fact, if I tune the tv vith the modulator without signal input, the tv recongize the channel (my LCN 777) with the station name (DVR HD), but if tune the TV with same situation but with HDMI connected to 1440X900, the TV don't recognize the channel and don't save nothing in the list. I hope in your help !!
  3. Hi, Ii have a DVR model AT-B3520HD with firmware V1.01.2839, the problem is HDMI output resolution, in the menu resolution, there are: 1024X768 1280X1024 1440X900 1920X1080 but it's working until 1440X900 NO WORK in 1920X1080 someone can help me ? There an firmware update ? I hope in your help !! Thank you
×