Jump to content

giovalx

Members
  • Content Count

    21
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Hello CCTV folk, I have four SZSinocam cameras that support 'Access Point' mode. Have any of you ever tested this functionality? Does it mean that I can connect the camera with an RJ45 LAN cable and use it as an AP to connect other wifi cameras? Or it only means that I can connect wirlessly my PC directly to the camera (used like an AP) using wifi without an external AP? Thanks, giorgio
  2. giovalx

    kkmoon camera firmware and support

    Thanks, giorgio
  3. giovalx

    kkmoon camera firmware and support

    Did you find the local shop to solve your problem? It is not bad that the seller sends you 15€ refund . They have told me the same. But no 'local shop' can solve a software bug. KKmoon should provide a new sw version, but their site is totally empty and they do not provide any email address. giorgio
  4. giovalx

    kkmoon camera firmware and support

    Thanks for your replays. The seller has given me a partial refund too. But the camera is useless (I use it with a mini NVR). I will be glad to be able to transform it in a fixed camera, totally disabling PTZ. giorgio
  5. giovalx

    CISCO SF300-24P AND 1 CATALYST 2960X FOR CCTV

    Just few suggestions: 1) - I suggest not using CAT 6 cables for inter-building connections: in the event of a lightning that strike close to the building the overvoltage can enter into the cabling and destroy all the switches and all the cameras. Use Optical Fibers instead. 2) - For the sake of service availability (136 cameras means that you have to control a large area) I suggest to buy a second distribution switch (you can buy another used 2960 on ebay) and connect each SF300 to both the distribution switches. The two 2960x can be connect togeter with a PortChannel or using a stacking cable. 3) - Partition the cameras in groups and use a different VLAN for each group. Giorgio
  6. I had the same problem: the gmail SMTP server does not accept emails from applications that are not considered 'secure'. I have enabled the 'Less secure Apps' (https://www.google.com/settings/security/lesssecureapps) option on my gmail account. Now it works. Giorgio
  7. Hello everybody, I have bought a cheap KKmoon IP camera with PTZ, model 805. I have two main problems: 1) the camera continuously reposition the PTZ in the position fully anticlockwise and fully down 2) the embedded web server does not show any image: the browser (I have tested IE and Chrome) says that the plug-in is unsupported The KKmoon site (www.kkmoon.com) is completly empty. Anyone knows how to contact them or where their firmware and plug-ins can be downloaded? Thanks, giorgio
  8. giovalx

    Mini nvr questions

    I don't know. I use only http access to the NVR and not the PC application. Is there any advantage using the Video Monitor Client?
  9. giovalx

    Mini nvr questions

    Have you tryied with: - rtsp://:554/main - rtsp://:554/sub
  10. giovalx

    Mini nvr questions

    On my NVR the access is on the standard telnet port: 23. Usr: admin, pwd: anni2013
  11. giovalx

    Mini nvr questions

    Another question: has anyone tested 3G dongles on the Mini NVR? Thanks again, giorgio
  12. giovalx

    Mini nvr questions

    Onvif. Now the problem is that I have two couples of cameras, in each couple the vendor and the software release are the same, and the configuration is identical, but in each couple only one of the two cameras works with motion detection recording. giorgio
  13. giovalx

    Mini nvr questions

    And here 3 other images:
  14. giovalx

    Mini nvr questions

    Find attached in this message and in the next the configurations I was talking about.
  15. giovalx

    Mini nvr questions

    I access to the cameras using their web interface or android app. For some of them I can also use the Onvif Device Manager application. I will try to post a configuration later Giorgio
×