Jump to content

bazzle

Members
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. The chip was 2.5 x 1.5 mm. Swept up in the dust..sorry IF... I find it Ill post back. Many thanks for your input
  2. bazzle

    Mini nvr questions

    Fixed Removed small IC chip with small screwdriver (prised off) All working agin, USB, HD, Mouse Next to last post on this page viewtopic.php?f=56&t=39628&start=765
  3. Fixed Removed small IC chip with small screwdriver (prised off) All working agin, USB, HD, Mouse
  4. viewtopic.php?f=56&t=39628&start=765 Next to last post down this page . I dont thinks its a HD issue. Same one(s) work OK on another unit the same. USB issue seems to be a known one. Mouse not working on USB either, tried 3 known ones that worked before.
  5. Every thing works fine other than the usb's. HArd drives (tried a couple all wotk OK away from unit. The comm to the usb's has been compromised. The link on the other posts shows a chip that "may" be the culprit. The NVR still works and shows all connected cameras. I just cant record anymore as HD plugs into usb.
  6. bazzle

    Mini nvr questions

    Hi all. Stuck with an issue on 2 Mini NVR's N6200-4E and N6200-8E Both units have now got the same problems. After a reboot the mouse cursor is stuck in the top left corner (2) Usb supplies power to ext HD but doesn't recognize it (2) I have tried a few searches on here and found a couple of posts similar but no real clues as to the proceess to fix. Both units still show ALL cameras when connected to a screen but there is no recording happening or menu access (mouse issue) Some valid pointers would be most appreciated Thanks Bazzle -------------------------------------------------------------------------- I posted this in another link http://www.cctvforum.com/viewtopic.php?f=56&t=52912 as I couldn't see same issue in this Looong thread initially. I had another run thru.. and found similar on page 49,52 etc On page 52 Mike (Posted: Tue Apr 14, 2015 6:59 pm) posted pix showing to remove a surface mount chip as 1st step to fix. He never came back to say what to do next (if you need too?) Quote: AND then??? Any one know IF this is the fix for the USB ports not functioning? Thanks Bazzle
  7. Thanks for the reply. Sadly I dont think it is an overheating issue. They stopped working from a cold boot. Both have the same usb issue. It leads me to think there is a software or hardware issue as all other camera viewing and network functions work. I probably need a way to RESET both units to see if the comm link picks up the usb connection . EDIT: I have found a similar issue in the Mini DVR Thread so I have cross posted there as well,on page 85... viewtopic.php?f=56&t=39628&p=295610#p295610 Posted: Mon Dec 19, 2016 10:11 pm
  8. Hi all. Stuck with an issue on 2 Mini NVR's N6200-4E and N6200-8E Both units have now got the same problems. After a reboot the mouse cursor is stuck in the top left corner (2) Usb supplies power to ext HD but doesn't recognize it (2) I have tried a few searches on here and found a couple of posts similar but no real clues as to the proceess to fix. Both units still show ALL cameras when connected to a screen but there is no recording happening or menu access (mouse issue) Some valid pointers would be most appreciated Thanks Bazzle
  9. To answer part of your 1st question I use these apps on my iphone. GooLink or XMeye. After they are working change your admin password (probably 'blank') to a good one in cams and app etc.
  10. bazzle

    Need help with night time / low light etc. cam

    I think NOT being covert would help more. Thief "may" see camera and leave your car alone. I have one that faces the street and flashes blue when it detects movement, glows red at night too. Nice deterant. http://www.ebay.com.au/itm/161459156617?euid=8e9dbb10a83849f48979670d0459c9a0&cp=1 Baz
×