afee12345

what type of splitter your using.change your splitter it may be a poor quilty type.

hi i have a panasonic WV-NW474 ip camera installed.does any one know how to configure it to work on the net so i can view from any were in the world? please help

thankyou for the help i will try it out and let you know

v.good at soldering iron am i thinking what your thinking,cut the end of the wire and solder bnc connectores at te end, leaving the two +/_ wire to rig up to a transformer? if that is the case, would the wires be colour coded and which wire is what? any ideas many thanks

sorry guys the multiplex has bnc inputs(16)

hi everyone i need help in seting my cctv system up. i got 16 cameras (make :groupe bisset mythos ccd camera )on the back it says 12v max ,2w and for use with model mvs12e. there are also two 6 pin round din holes ,one says monitor and the other aux. now the question is i want to connect the cameras directley to a multiplexer 16ch.then to a recording device/monitor.is it possible to get a cable or adapter to convert from 6 pin din to normal twist din to go on to the multiplexer and how are the cameras going to power up(would i need to strip the wire and find the +/- wire and wire them directly to a transformer). desperatly need help as reading some threads i belive some pro on this site can help me out. a big thanks in advance