jpatt2020

So i figured this out for anyone having the same issue I wanted to post the solution I reached. I went into my router settings and maxed out my UDP and TCP timeouts. The UDP timeout was set at 12 hours, so that was the culprit (I'm assuming), as everything works perfectly now!

This sounds like a good idea. I have certainly checked my IP with canyouseeme, etc., and it has not changed. Just really odd that it works EVERY time i restart the DVR for about 18 hours, and then i can no longer connect to it (whether I'm trying from the inside on the LAN, or the outside).

Hi All. I have AT&T Uverse and a Aposonic 4 channel DVR. It's been working great for a couple of years with a static IP and port forwarding. I use an app on my phone to remotely view cameras. I've recently had a new issue develop where I'm no longer able to remotely connect to the DVR either on the LAN or via the NET outside of my LAN. I tried resetting the DVR and it works....only for about 8 hours. Then I can no longer connect. Thinking it was a hardware issue with the DVR itself, I replaced the DVR and same issue. It's almost as if the port forwarding is timing out, or my network connection is dropping out. The DVR is hardwired directly to the AT&T router. Any ideas? I'm out of them!