Jump to content

tekworldinc

Members
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. tekworldinc

    Interference issues?

    Ill just use an old school AM radio to locate the interference.
  2. tekworldinc

    Interference issues?

    So as I thought, replacing the coax wouldn't make a difference? The interference could affect a new cable. Is there a device to locate interference?
  3. tekworldinc

    Interference issues?

    I viewed the camera (standing on a ladder right next to it) with my wrist monitor and it was clear. The interference wouldn't effect it the same way?
  4. tekworldinc

    Interference issues?

    yes yes and yes.
  5. tekworldinc

    Interference issues?

    It's commercial off a roll not from the prepackaged kits. Installed by someone other than me.
  6. tekworldinc

    Interference issues?

    Not sure about that. Im just going to change the cable and use mine. I just didn't want to replace the cable and that not be the problem. Thanks.
  7. tekworldinc

    Interference issues?

    Standard black rg59. Should I get the plenum type?
  8. tekworldinc

    Interference issues?

    I tested the camera on the existing power supply. I just disco'd the coax and hooked it up to my mini cam viewer and the picture was clear as a bell.
  9. tekworldinc

    Interference issues?

    Good day, I am working on a camera issue for one of my computer customers. I replaced both bnc connectors and the camera checks out fine. I don't see anything wrong with the cable line either. Is there an interference issue? There is some electrical conduit and lights very nearby this camera. It's mounted to a thick wooden store front sign. I want to look into all options before I replace the wire. Thanks in advance for your help.
  10. I have an installation that I can't use a dome camera (outdoor) or standard bullet camera. It's in a brick facade over an entry door with only a couple inches of space to mount the camera. It's an RG59 siamese connection hooked up to a Digital Watchdog vmax h.264 dvr. Also I need to hide the wiring in the mount or something if possible so i cant be tampered with. Any suggestions? Thanks.
×