Jump to content

costel

Members
  • Content Count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. costel

    can't configure new DVR

    I really can't explain why, but I managed to make it work. The DMZ on both routers is 192.168.1.10 DVR's IP is 192.168.1.3 (automatic) Using SuperLivePro with just the external IP works (not adding :port after it, as the app asks for). On settings it shows external_ip:8080 but if I put the :8080 on login page it doesn't work.
  2. costel

    can't configure new DVR

    It's a business line. Not with guarranteed speed, but a business line. ~6 months ago it worked. We had a Cisco router at that time. Our DVR started having problems about the same time the router died. I thought was a DVR problem until we changed the DVR. Now I realise I didn't do one thing that might help. Factory reset the router and set up the static IPs again, I only did normal reset. For the app, im using the IP as it's shown on any ip-check-website, the port set on the DVR, user (admin) and its pass.
  3. costel

    can't configure new DVR

    Im from Romania. 3G doesn't work either. I use mostly the 8080 port. This one was for the previous DVR. Also tried 34567, 1612, 5939 and others Also, I enabled each port I used in both routers.
  4. costel

    can't configure new DVR

    Both 4G and Wi-Fi. Tried with DMZ .150 on Ubee, still doesn't work. I found out that Ubee 3226 doesnt support NAT loopback, but that doesn't affect me when using mobile network, right?
  5. costel

    can't configure new DVR

    I tried it. I get "login connection timeout" after 1 minute of searching. Btw, I can log in from home pc using ip:80
  6. costel

    can't configure new DVR

    Hey, I tried 5-6 apps and I couldn't connect with any. Which one/ones should I use?
  7. Hello, The old DVR stopped recording and we received a new one, Navaio NAV-T04S. I can't figure out how to configure it to see images from my phone. Please tell me where I'm mistaking: router UPC Ubee 3226 ip: 192.169.1.1 ip mask: 255.255.255.0 dhcp enabled, starting ip adress 192.168.1.2 dns 1: 192.168.1.1 dns 2: 0.0.0.0 (doesn't change regardless of the number I'm writting) dmz: 192.168.1.10 router TP-link TL-WR841ND, bridged, rj45 cable from DVR to router lan, ip: 192.168.1.150 mask 255.255.255.0 dhcp enabled gateway & primary dns: 192.168.1.1 secodnary dns. 8.8.4.4 dmz: 192.168.1.10 dvr http port: 80 server port: 8080 network adress: 19.168.1.10 mask: 255.255.255.0 gateway& pref dns: 192.168.1.1 alternative dns: 8.8.4.4 I can see the images with IE and Navaio software on network computers, but not on phone.
×