Jump to content

shoties

Members
  • Content Count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. I want to rebuild firmware for TVT DVR 2316ME. Im using UARTO debug rs-232 connection. Connection of COM settings seems to be fine: Bits: 115200 / 8 / none / 1 / none While reading log i can't hit break command - CTRL + C to abort. Tried in other terminals like putty etc. and other PC's. The effect is the same - system is starting continuously. Any tips ? Example log: In: serial Out: serial Err: serial close watch dog begin............... dog_close Ŕs˙ŕüdog_close NAND: NAND_ECC_NONE selected by board driver. This is not recommended !! 128 MiB no redund = -767506610, tmp crc -767506610 U-Boot 2008.10 (Nov 30 2011 - 16:23:28) DRAM: 3 GB Flash: 2 MB gd->env_valid = 1 In: serial Out: serial Err: serial close watch dog begin............... dog_close dog_close current do_check_flash_boot_param product type 49 === 1 *****+++++******* do_auto_update 201111301027 USB: scanning bus for devices... 1 USB Device(s) found 0 Storage Device(s) found Press CTRL-C to abort autoboot in begin ... do_auto_logo_image ntsc pal 1 logo img width 0, height 0, vga out = 8 jpeg decoding ... <> <> decode success!!!! start addr color = 0, logo img width 480, height 320 NAND read: device 0 offset 0x200000, size 0x100000 1048576 bytes read: OK NAND read: device 0 offset 0x300000, size 0x200000 2097152 bytes read: OK NAND read: device 0 offset 0x500000, size 0x300000 3145728 bytes read: OK NAND read: device 0 offset 0x0, size 0x200000 2097152 bytes read: OK ## Booting kernel from Legacy Image at c1300000 ... Image Name: hilinux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1529468 Bytes = 1.5 MB Load Address: e2800000 Entry Point: e2800000 Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux................................................................................................. done, booting the kernel.
×