Jump to content

LucyB

Members
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Tried to have a 110 socket installed on top of cart but was not allowed by elevator company
  2. How does that work with POE camera ?
  3. The camera needs to be installed in the cab , there is a traveling cable that links the cab to the elevator penthouse on the roof. There is no EMT running to the cab as it moves up and down .
  4. In the elevator penthouse we have a cat6 cable that runs back to a switch on the 7th floor. Camera and recorder are all up based .
  5. I doing an install on a 7 floor building and was expecting coax in the traveling cable for the elevator for a camera install but the elevator company said that they don't install coax or cat5 cables as they have seen them break after a few years. (even the ones with steel in them) They have handed me 5 X 20/2 AWG shielded wire I had hoped to do a IP camera and then a coax /POE injector for the camera http://www.veracityglobal.com/products/ethernet-over-coax-devices/highwire-powerstar.aspx but that looks like that might not be possible any ideas ? would a male BNC break out connector work ?
×