Jump to content

keithy

Members
  • Content Count

    44
  • Joined

  • Last visited

Community Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi Tom thanks for your hellp, problem solved when i set up the system i had left the 5mp cameras password to the default & when i got the other 2 a couple of weeks later i changed the passwords so was entering the changed password the camera was set to a different gateway ip all changed and working used ie on my macs windows in compatibility mode to reset the camera thanks again Tom.
  2. Hi tom where would i find the network & share program ? I got a cheap emcam 9 ip nvr, i have a poe switch the encam see and works with the 2 3mp qvis cameras It sees the 5mp camera but wont connect i have no internet at the shop just want to record anything we are shut due to the covid crisis thanks Tom
  3. or how can i reset the camera to default Its coming up with an ip of 169.254.212.113 when it is set to 192.168.1.101 local and can not be accessed thanks k
  4. Hi i have a qvis eyevip-5-fw poe camera it was part of a 3 camera network the nvr has died i bought a diferent nvr the other 2 cameras ( which are a different model ) still work but this one wont link. When i input the ip address it goes to the logon page but the browser needs a plugin which wont work. I remember when i got the cameras a few years ago there was a program that allowed to set up camaras but cant remember. Can anyone please point to a program that will allow me to log into the camera to test and configure it. Many thanks keith
  5. Hi have had this system for a couple of years with 2 x 3mp cameras ^ 1 5mp camera has been working perfectly until the other day when the display on monitor turned off. All i get now is no signal the nvr makes the right sounds but no display there is only an hdmi so no other connections to try. If you go to the router its still there any ideas ? Thanks K
  6. keithy

    Qvis viper 5mp poe nvr

    Hi disconnected the hard drive & the cameras screen still had interference tried a pie hub with the cameras still the same ? Nightmare thanks k
  7. keithy

    Qvis viper 5mp poe nvr

    Yes I seen that in your first post. I still need you to do some tests Ok i will unplug the hdd cheers k
  8. keithy

    Qvis viper 5mp poe nvr

    Hi yes I only have 3 cameras If I use the mobile app the picture is perfect
  9. Hi have a qyis nvr it has worked fine for 8 months but this week the output to the tv has become jerky switches off and is full of interference. I have swapped the hdmi cable, changed tv's the picture is still the same. When viewing with the app ton smartphone the picture is fine. Anyone have any ideas ?
  10. keithy

    Qvis amb m3 dome poe

    No I can view the camera on the nVR by plugging the Ethernet frombthe camera into the router and a PSU into the cameras power but if I plug the camera directly into the router it's not detected but the camera,s up is set as 192.168.1.80 but the nvrs 5mp camera is a totally different IP like 191.120.2.191 or something like that ? Hi. Poe will not work through a router Poe will only work via NVR Poe or a Poe switch or injector Yes when i plug the abm m3 camera into the nvr it dosnt detect the camera The 5mp camera plugged into the nvr is detected If i plug the camera into the router and plug power in the amb m3 camera is detected on the nvr the nvr has an ip address of 192.168.1.100 the 5mp camera is given an ip of 169.254.212.113 from the nvr the abm m3 camera has an ip of 192.168.1.80 from the router which is the default of the camera ?
  11. keithy

    Qvis amb m3 dome poe

    No I can view the camera on the nVR by plugging the Ethernet frombthe camera into the router and a PSU into the cameras power but if I plug the camera directly into the router it's not detected but the camera,s up is set as 192.168.1.80 but the nvrs 5mp camera is a totally different IP like 191.120.2.191 or something like that ?
  12. keithy

    Qvis amb m3 dome poe

    I got the ABM cameras from a mate and pressed the reset button them if that makes any diferance
  13. Hi i have a qvis viper nvr with 1 5mp poe camera works great & 2 3mp amb m3 dome cameras poe ?when connected to the nvr the power light comes on but the cameras are not detected, if i plug them into the router and use a power supply they work, they are meant to be poe cameras do they need a firmware update any ideas cheers Keith
  14. keithy

    Qvis Viper Nvr Android App

    It the superlive app you need Outstanding as usual Many thanks Tom
  15. keithy

    Qvis Viper Nvr Android App

    Hi menu is black have tried qvis explorer Qv pro Thanjs
×