Jump to content

rascalsailor

Members
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Thanks for reply but what is the logic behind that? why would a non poe nvr with ip ports for the cameras be any different is this regard (other than not supplying power via the network cable?) Regards
  2. Is the internal ip switch with its own ip address range (as opposed to the external lan ip port) only provided if the nvr supports poe? I get the impression that non poe nvr’s have both nvr and camera ip’s on a common subnet with no separate internal nic (is that correct?) Why would a non poe nvr with ip ports for the cameras be any different is this regard (other than not supplying power via the network cable?) Regards
  3. Hi all - Am new to the forum - (and really impressed) I have a Hikvision DS-7104ni-sn/p NVR I was given a camera with the following specs: Model Number: C146P36 960P IP Camera made by Ansjer The info from the manufacturer says that it supports: FTP/PPP OE/DHCP/DDNS/NTP/UPnP/ONVIF and Compression: H.264, AVI formats I contacted their tech help and was further told that: The camera does NOT support RTSP nor POE I was trying to see if I could interface it to the DS-7104ni-sn/p NVR I connected the camera to my LAN and can view it in IE at its IP address I can also view it on an android device with TinyCam This camera has a media port set to 34567 and the HTTP port is 80 It has a user name and password set Camera IP is: 192.168.2.55 NVR IP is: 192.168.2.108 Now with the NVR also connected to the LAN and having logged in to the configuration page, I was hoping to be able to add the camera using the Custom add IP camera under the protocol management menu; But I get an error - see pic 2 below I did read a number of references to adding third party cameras and it seems that I would need to choose the ONVIF protocol type. If I look under the protocol mangement menu it seems to use RTSP under the stream - see pic below now this camera doesn't support RTSP but this seems be used by ONVIF - So is this a no-go with this camera and this NVR ? (yes I intend to go with something newer, but while I have the camera, I thought I'd try it) thanks all regards Russell
×