Jump to content

eric9547

Members
  • Content Count

    42
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. eric9547

    Lagless Live View Camera/System For CNC Machines

    I'll see if I can find these in the US. Thanks Tom.
  2. eric9547

    Lagless Live View Camera/System For CNC Machines

    The machine is an open machine. Here's a video of it. Due to the pc control location and size the operator cannot see when he has jogged material to the first clamp for referencing. Punches on each side of the machine need to be seen for tool change alignment and operation. I was thinking of getting a four channel system. One to see the infeed. One for each punching side and the fourth for the shear end. What do you think?
  3. eric9547

    Lagless Live View Camera/System For CNC Machines

    Will definitely take a look at those part numbers. Thanks Cyanide!
  4. eric9547

    Lagless Live View Camera/System For CNC Machines

    Tom good to see you man. I remember years back looking at these cctv systems for my welding shop and found a lot of your posts helpful. Glad your still around. I'll see what I can find for cvi with motorised lens.
  5. eric9547

    Lagless Live View Camera/System For CNC Machines

    Are there any NVR's that are compatible with the older analog camera's? I will still need to store video but direct view should have very low lag. How many milliseconds is acceptable before noticing?
  6. I'm needing some camera's in a shop to be able watch a CNC machine in operation. What would you guys recommend? I want to stay away from IP camera's due to the slight video delay. The operators need to be able to see everything the machine is doing in real time. Hopefully there is an inexpensive solution. Thank you, Eric
  7. eric9547

    Nuvico NUVICO CB-SD3895N-L Opinions.

    Awesome camera's. I'm using six of them.
  8. eric9547

    I hope he is well insured...

    He's not alive after that.
  9. eric9547

    IT people will find this funny

    http://www.thewebsiteisdown.com/salesguy.html LMAO
  10. What power supply would go great with these bullet cameras? I've heard altronix is good but dont know which model I should go with.
  11. I'm just going to go with cat5. Thanks guys
  12. What is an inexpensive active balun solution I can go with? With eight channels what would I need exactly? Thanks
  13. Would there be any problems if I went with Cat5 instead. That way should I want to upgrade to IP camera's I can.
  14. eric9547

    no longer for sale

    I'll give you $50 for it.
×