Jump to content

exahertz

Members
  • Content Count

    2
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. nm, it was just a driver issue. i used BtInstall from Argus and it seemed to fix the problem.
  2. Hi, i have a odd ball DVR card that i cant seem to find any info on. anyways... on the card is 4 conexant fusion 878a chips. i installed the WDM drivers for the chips and in device manager they are seen as "Studio WDM video capture". it also installed a lot of other stuff and all of the devices are working properly. i have noticed that all of the Studio WDM video capture devices IRQs are set for 11 but i cannot change anything. heres my problem: I use my dvr program Eyeline, and can see four selectable cameras, and in the program i can select all four at once. so the software is okay (im pretty sure). but i can get an image from only one input at a time. if i have cameras on inputs 1,2,3 and 4 and in device manager i have all four 878 chips enabled only channel 4 will have an image, and the other three are black Eyeline will say that those 3 devices are unplugged. if i have cameras on inputs 1,2,3 and 4 and in device manager i only have one 878 chip enabled Eyeline will see only that one 878 chip and there will be an image there if i disable that one 878 chip and enable another i can see another camera\ its kinda acting like theres some sort of conflict. any ideas???? Thanks, and happy fathers day!
×