 |
|
 |
IP panel-free access control
|
|
|
| thewireguys |
|
Posts: 281
Joined: 03 Nov 2007
|
|
Posted: Thu Mar 27, 2008 12:59 pm
Post subject: IP panel-free access control
|
http://www.isonas.com/
Anyone using their products? This stuff looks like it is alot easier to install then panel based systems. Hell one of their products is P.O.E. ready and you can use it to power the locks, that's alot less wiring.
http://www.youtube.com/watch?v=xSed2K4BMuY
Last edited by thewireguys on Sun Aug 10, 2008 4:16 pm; edited 3 times in total
|
|
|
|
|
|
|
| jeromephone |
|
Posts: 306
Joined: 30 Apr 2005
Location: ST Joe , MI
|
|
|
Posted: Sun Mar 30, 2008 4:48 pm
Post subject:
|
|
pelco has an Ip system but have not used it. SOme locking systems use more power than a poe system can supply.
|
|
|
|
| ClosedCircuitCom |
|
Posts: 149
Joined: 26 Mar 2005
Location: Michigan
|
|
|
Posted: Sun Apr 13, 2008 6:44 pm
Post subject:
|
i have used the HID Edge stuff and it works great
but i think im gonna take a good look at isonas i think i like thier software better
|
|
|
|
| thewireguys |
|
Posts: 281
Joined: 03 Nov 2007
|
|
|
Posted: Sat May 17, 2008 11:32 am
Post subject:
|
I just ordered one of there Powernet readers with a keypad to test. I have a 2 door install I would like to use this system on.
_________________
"There is no point to spend the money on a video surveillance system if you can't identify the person or object with the system."
|
|
|
|
| scorpion |
|
Posts: 2704
Joined: 26 Mar 2007
Location: Melbourne Florida
|
|
|
Posted: Sat May 17, 2008 1:51 pm
Post subject:
|
|
|
|
| thewireguys |
|
Posts: 281
Joined: 03 Nov 2007
|
|
|
Posted: Sat May 17, 2008 6:21 pm
Post subject:
|
Looks like a nice product but I like Isonas because we are keeping everything IP based.
_________________
"There is no point to spend the money on a video surveillance system if you can't identify the person or object with the system."
|
|
|
|
| thewireguys |
|
Posts: 281
Joined: 03 Nov 2007
|
|
|
Posted: Mon May 19, 2008 11:41 pm
Post subject:
|
The PowerNet reader with keypad came today. Very cool product. Very easy to install when using a strike. Run one cat5 to the reader then splice the strike to the wire pigtale. Alot less wire and labor.
The software is very powerful but unless your using it everyday you would need to keep the manual handy and your normal person would have a hard time rappin there head around it.
They need to make there software more end user friendly other wise it is a great product.
I was on the phone with there tech support for about 2 hours very helpful I enjoyed talking with them.
I think with this product I could do the same install as a panel system ( talking strikes) for hundreds less per door.
_________________
"There is no point to spend the money on a video surveillance system if you can't identify the person or object with the system."
|
|
|
|
| thewireguys |
|
Posts: 281
Joined: 03 Nov 2007
|
|
|
Posted: Wed May 21, 2008 1:58 am
Post subject:
|
I was on the phone again with Isonas tech support. Everything is running perfect I just had some questions about the software and I didn't feel like reading the manual. Once again I was one the phone for about an hour and I think I made a friend. I will sell this product and put my name behind it.
I also found out you can power maglocks with POE. The POE output for mags/strikes is 12 volt min .5amps you even have power left over for the REX motion and/or lighted REX button.
I found many maglocks that use less then .5amps even 1600lb ones.
_________________
"There is no point to spend the money on a video surveillance system if you can't identify the person or object with the system."
|
|
|
|
| jeromephone |
|
Posts: 306
Joined: 30 Apr 2005
Location: ST Joe , MI
|
|
|
Posted: Fri Jun 13, 2008 7:39 pm
Post subject:
|
|
I did not know that you could run that much power from a poe system. Does anyone know if you can run like a double latch retraction device with POE?
|
|
|
|
| thewireguys |
|
Posts: 281
Joined: 03 Nov 2007
|
|
|
Posted: Fri Jun 13, 2008 9:25 pm
Post subject:
|
| jeromephone wrote: |
| I did not know that you could run that much power from a poe system. Does anyone know if you can run like a double latch retraction device with POE? |
Isonas can power anything 12dc up to .5 amps
_________________
"There is no point to spend the money on a video surveillance system if you can't identify the person or object with the system."
|
|
|
|
| ak357 |
|
Posts: 275
Joined: 16 Nov 2005
Location: Canada
|
|
|
Posted: Fri Jun 13, 2008 9:27 pm
Post subject:
|
| jeromephone wrote: |
| I did not know that you could run that much power from a poe system. Does anyone know if you can run like a double latch retraction device with POE? |
Clause 33 of IEEE 802.3-2005 (commonly referred to as IEEE 802.3af)
selectable current of 10–400 mA subject to a maximum load power of 15.40 W.
Only about 12.95 W are available after counting cable losses
|
|
|
|
| thewireguys |
|
Posts: 281
Joined: 03 Nov 2007
|
|
|
Posted: Fri Jun 13, 2008 9:32 pm
Post subject:
|
| ak357 wrote: |
| jeromephone wrote: |
| I did not know that you could run that much power from a poe system. Does anyone know if you can run like a double latch retraction device with POE? |
Clause 33 of IEEE 802.3-2005 (commonly referred to as IEEE 802.3af)
selectable current of 10–400 mA subject to a maximum load power of 15.40 W.
Only about 12.95 W are available after counting cable losses |
Isonas told me there is 1amp total power available for power.
He said the the reader uses .2amps, strikes/mags can use no more then .5amps, and the left over .3 is used to power motions, REX buttons, and anything else you would need.
I have one reader installed in my office for about 2 weeks with a strike. I haven't had any problems at all. Great product
_________________
"There is no point to spend the money on a video surveillance system if you can't identify the person or object with the system."
|
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum
|
| Page 1 of 1 .:. |
|
|
|
