 |
|
 |
Geo 8.2 Problems or opinions
|
|
|
| secureconcepts |
|
Posts: 58
Joined: 27 Feb 2008
|
|
Posted: Wed Apr 09, 2008 12:33 pm
Post subject:
|
VSM is very usefull.
But they can still delete files ....! (VSM will detect it, but files are gone ....).
I am trying to figure out what a user can do without fysical access to the system, I know they can get into save mode, witch is risky (have not tested all the options yet!).
With fysical access it's very simple (and a not recommended setup).
|
|
|
|
|
|
|
| 501 |
|
Posts: 358
Joined: 17 Oct 2006
|
|
|
Posted: Wed Apr 09, 2008 11:11 pm
Post subject:
|
|
Ya, truthfully, with Physical Access, there is nothing you can do to prevent it. Heck they could just short some wires and kill the hard drive, or put in a boot disk and then format the drives. Hiding the DVR system and only using remote access can help this.
|
|
|
|
| secureconcepts |
|
Posts: 58
Joined: 27 Feb 2008
|
|
|
Posted: Sun Apr 13, 2008 4:16 am
Post subject: Object tracking zooming
|
Couple of issues:
- when in test mode and you have idle-protection set. he moment idle protection start the monitoring the system crashes (full restart).
Not a big thing since you are in test mode, but don't believe it's designed to crash !
- The fine tune buttons are available for 1 second (test mode) making it virtually impossible to fine-tune the pan/tilt.
- When the system restarts and you have tracking/zooming enabled it will NOT go back to these settings. You have to enable the dome again for tracking. Go to setup and enable zoom (default is tracking) and then start the feature.
Any idea how this could be done ? (normally it never restarts but if it does you lose these settings).
|
|
|
|
| secureconcepts |
|
Posts: 58
Joined: 27 Feb 2008
|
|
|
Posted: Sun Apr 13, 2008 7:11 am
Post subject: Object tracking / zooming
|
one other issue showed up (tracking / zooming):
- the system zoom's in on objects that are detected outside the detection region. If the object is outside the detection region and it touches the detection region just a bit (1% is enough) than it zoom's in on it.
The object should be fully in the detection region before zooming in.
|
|
|
|
| secureconcepts |
|
Posts: 58
Joined: 27 Feb 2008
|
|
|
Posted: Fri Apr 18, 2008 3:26 am
Post subject:
|
tracking and zooming again.
I am probably the only one using this feature ....
When in zomm mode, it zoom's in on the object and stays zoomed in it does not direct the dome back to the initial screen after the set time.
|
|
|
|
| Arockerdude |
|
Posts: 123
Joined: 30 Sep 2006
|
|
|
Posted: Fri Jun 20, 2008 6:02 pm
Post subject:
|
|
Can someone tell me why my 8.2 Software looks different than the picture above. It seems I have all the new options like PIP. And it says it is version 8.2 But the face or skin is the same as before. Not like the pic. above. Do I have a fake or beta or something? Thanks Dave
|
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
|
|
