 |
|
 |
Metal Mickey's
|
|
|
| alanjh1965 |
|
Posts: 97
Joined: 03 Nov 2005
Location: London
|
|
Posted: Mon May 19, 2008 4:32 am
Post subject: Metal Mickey's
|
I am designing my first housing estate and was considering Forward Vision's MIC1.
Has anyone had experiance of installing these and from a service POV are they reliable (they do have a 3 year warranty)
Any info will be appreciated !
http://www.fvcctv.co.uk/products/
|
|
|
|
|
|
|
| rory |
Moderator & Founding Member
|
Posts: 14310
Joined: 10 Nov 2003
Location: Bahamas
|
|
|
Posted: Mon May 19, 2008 4:37 am
Post subject:
|
|
|
|
| alanjh1965 |
|
Posts: 97
Joined: 03 Nov 2005
Location: London
|
|
|
Posted: Mon May 19, 2008 4:55 am
Post subject:
|
Yes they are from a Good Pedigree and so they should be for the price (£2700 / $5000) 
Extreme / Derwent is now owned by Bosch !
I went to the Forward Vision factory here in the UK a couple of years ago when I used to work for ADT (moment of madness) and they are very well built and tested, they had one on test in an oven for two years at over 100 degrees and one under water in a fish tank !
Never got the chance to install one, so I don't know if there are any pitfalls.
AL
|
|
|
|
| CCTVinfoguy |
|
Posts: 4
Joined: 06 Jun 2008
|
|
|
Posted: Fri Jun 06, 2008 2:12 pm
Post subject:
|
|
i think you can find a video of the moondance on their web page getting hit with a fire hose.
|
|
|
|
| kensplace |
Moderator
|
Posts: 920
Joined: 30 May 2006
Location: UK
|
|
|
Posted: Fri Jun 06, 2008 2:50 pm
Post subject:
|
|
Im sure they use the metal mickeys in the UK Big Brother, although they may have changed the internal camera to a broadcast quality one instead of the standard sony block module.
|
|
|
|
| alanjh1965 |
|
Posts: 97
Joined: 03 Nov 2005
Location: London
|
|
|
Posted: Fri Jun 06, 2008 3:01 pm
Post subject:
|
|
Ahhhhh, Big Brother..... 12 Weeks of the Wife having Custody of the Remote
|
|
|
|
| sam10693 |
|
Posts: 24
Joined: 07 Apr 2007
|
|
|
Posted: Tue Jul 01, 2008 1:13 pm
Post subject:
|
|
Hi ive got a metal mickey on my house and believe me there a bloody brilliant camera never had any problems at all. Im using a standard wall mount and its just as easy as a static drill you holes,run your cable,mount the bracket,plug your cable in to the mickey then bolt down easy as. i recomend it with all my heart and the service a fv is great aswell hope this helps best regards Sam.
|
|
|
|
| alanjh1965 |
|
Posts: 97
Joined: 03 Nov 2005
Location: London
|
|
|
Posted: Tue Jul 01, 2008 2:46 pm
Post subject:
|
Thanks Sam, a few questions.....
1. What Controller/DVR do you use
2. What lighting at night have you got or has yours got the mounted IR's?
3. Have you got a picture of it... to replace the one of my wife in my wallet 
|
|
|
|
| sam10693 |
|
Posts: 24
Joined: 07 Apr 2007
|
|
|
Posted: Tue Jul 01, 2008 2:58 pm
Post subject:
|
Hi mate right im using a dedicated micros sprite 2 set to bbv coaxial telemetry then i use a bbv rx100 set for forward vision so remember if you get metal mickeys have the protocols set to standard forward vision then all you shuld need to do is connect your 2 data recieve wires of the mickey to yor rx100 interface and connect the video to the camera bnc on the rx100 then coax from the telemettry bnc on the rx100 streight to a dvr or controller that transmitts bbv coax. sorry my camera dose not work so no pic  if you have any more questions i will be happy to help. best regards Sam
|
|
|
|
| alanjh1965 |
|
Posts: 97
Joined: 03 Nov 2005
Location: London
|
|
|
Posted: Tue Jul 01, 2008 3:09 pm
Post subject:
|
Thanks Sam, I always use DM too, were budget allows.
I didn't think about using BBV, I guess it saves running Data from the DVR.
What about Presets, I understand you can get an alarm board from FV but can you program Presets direct from the DM, I have used BBV before with Dennard PTZ's and they dont always have the facility ?
Our if you home run Redwalls etc to the DM can you trigger the preset that way
(I am used to using American Dynamics SpeedDomes)
AL
|
|
|
|
| sam10693 |
|
Posts: 24
Joined: 07 Apr 2007
|
|
|
Posted: Tue Jul 01, 2008 3:17 pm
Post subject:
|
|
Coincidence i have ad domes aswell right as far as i know you can program presets direct from a ds2 but you see i never bother with preesets as i dont need them. But i used to have a digital sprite lite mux and i could program preesets direct from that so can only assume you can with a ds2 hope this helps best regards Sam.
|
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
| Page 1 of 1 .:. |
|
|
|
