 |
|
 |
Security Cameras Direct WDR camera and Computar lenses.
|
|
|
|
|
| nickfarwell |
|
Posts: 1
Joined: 16 Jul 2008
|
|
Posted: Wed Jul 16, 2008 7:04 pm
Post subject: Security Cameras Direct WDR camera and Computar lenses.
|
|
I just got a CPC4038WD from SCDlink to replace a Sony HyperHAD that was failing. I run a small private cable system in the building to monitor what is happening on stage (theatres). The last time I bought a WDR camera, the lens just plugged right in and it was a straight swapout. This time, when I plug in the 4-pin jack to enable the lens, the image pops up for second, and then fades to black. Nothing I can do can bring it back. If I half-plug the jack in, the iris seems to be stay open. I also do not have the same dynamic range as the other camera (iris is not actually being controlled?), and not all of my Computar lenses work in the camera. Do I have a bad camera? Does it require a different wiring of the plug? I'm a bit lost. I would post links, but I'm new and shiny and not allowed, so you'll have to use "the google", sorry.
|
|
|
|
|
|
|
| RickA |
|
Posts: 750
Joined: 28 Sep 2007
Location: Kentucky
|
|
|
Posted: Thu Jul 17, 2008 8:18 am
Post subject:
|
Check to see if there is a switch on the camera for dc/ video depending on the type of lens, you need to set the switch for the lens type. Hope this helps 
_________________
Pegasus CCTV Tech support Rick www.pegasuscctv.com
|
|
|
|
| 3RDIGLBL |
|
Posts: 111
Joined: 27 May 2008
|
|
|
Posted: Sat Jul 19, 2008 8:55 am
Post subject:
|
Try turning the ALC up. I believe this adjust power to the lens and maybe it is set too low to keep the lens open.
Just another thought.
|
|
|
|
|
Options and Permissions
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
| Page 1 of 1 .:. |
|
|
|
