The static ip address that was being used is not accessible over the internet. Is there some way to verify the static ip address? How do you setup the static ip address?
Control (Bottom Right)
\Setup (Top Right)
\Network (5th Tab from the Right)
Select Web Login Required (Green Check Mark)
Click on 'IP Address Setting ' Button
This will open a window for your Network
Connections.
Right click Local Area Connection and then select Properties.
In the Local Area Connection Properties Window:-
Select - Internet Protocol (TCP/IP) and click Properties.
In the Internet Protocol Properties Window you can set the IP Address to Static by selecting {Use the following IP address} {Use the following DNS server addresses}
For the DNS Server input the default gateway address for Preferred DNS server.
That's it your done.
Make sure you use an IP Address that's not already in use.
If you want the Manual, PM me your E-mail Address and I'll send it to you.
Or Contact Tech Support and they will direct you to the download location.
P.S. What version Software are you using? Are you an End User or an Installer?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
