Jump to content

Recommended Posts

Hi wondering if anyone can help?

 

Im getting fuzzy lines across the screen, they're not moving up and down just in one place in the centre.

 

* Its a pelco spectra iv with the pelco power supply

 

* Running a 230v upto the power supply which is 1 foot away from the camera and 26v from the power supply to the camera. (originally was on 24v but i thought id up it up to see if that solves the problem)

 

* The cable running from power supply to camera is probs 2 foot in length and is a 1.5mm lighting

 

*ive tried two different cat5/6 cables for video feed, and also tried different baluns, currently running a solid copper cat 6e cable, only 20 meters if that from the camera to dvr

 

any suggestions?

1014130550_NewPicture.jpg.6efe5aa0b9ba40f2cef7f0d32bd27d45.jpg

Share this post


Link to post
Share on other sites

Do you have any other cameras? If so, then swap the camera with one that is working perfectly.

 

If the problem follows the camera, it's the camera.

 

If the problem stays even with another camera, it's something else besides the camera.

 

You can continue swapping pieces between things that definitely work and things you question to figure out what's wrong.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×