Jump to content

Recommended Posts

Hi,

I have a problem with the app of Goolink, I used now for 6 weeks

And no problems, sinds a few days i can not connect from outside.

Only on my own wifi inside, and not on the internet outside.

Everytime i start the goolink app, he say "not at wifi"..

Is there somebody who can help me please?

 

Thx Kurt

Share this post


Link to post
Share on other sites

Hi,

I have a problem with the app of Goolink, I used now for 6 weeks

And no problems, sinds a few days i can not connect from outside.

Only on my own wifi inside, and not on the internet outside.

Everytime i start the goolink app, he say "not at wifi"..

Is there somebody who can help me please?

 

Thx Kurt

 

Hi. If it was me I would change to a better recorder .

 

China p2p is junk and DIYers need to understand..... Why it is bad to use a China server.

 

But looking at the app history they have had problems the past few weeks. And have gone back to a old version

 

So remove all apps switch off your router and recorder then do a rest on recorder....... Switch everything back on then re register .... Use the QR code given from recorder.

 

But look at the feed back of that app.

image.thumb.jpeg.0c13d143de36d12728bc520a78750f54.jpeg

Share this post


Link to post
Share on other sites
Hi,

I have a problem with the app of Goolink, I used now for 6 weeks

And no problems, sinds a few days i can not connect from outside.

Only on my own wifi inside, and not on the internet outside.

Everytime i start the goolink app, he say "not at wifi"..

Is there somebody who can help me please?

 

Thx Kurt

 

Hi. If it was me I would change to a better recorder .

 

China p2p is junk and DIYers need to understand..... Why it is bad to use a China server.

 

But looking at the app history they have had problems the past few weeks. And have gone back to a old version

 

So remove all apps switch off your router and recorder then do a rest on recorder....... Switch everything back on then re register .... Use the QR code given from recorder.

 

But look at the feed back of that app.

 

OK Thx for ur advice

Share this post


Link to post
Share on other sites

I have the same problem. Goolink worked for past year, now only works on LAN - will not connect when on WAN (outside of house).

 

How were you able to get it working again?

Share this post


Link to post
Share on other sites

I have discovered that when i switched my T-Mobile service over to the new ONE plan, they block video. I put my phone on a verizon hotspot and it works fine. T-Mobile is looking into it, but the solution may be to see if I can get the sub-channels down to 480 or lower resolution. any ideas?

Share this post


Link to post
Share on other sites
I have discovered that when i switched my T-Mobile service over to the new ONE plan, they block video. I put my phone on a verizon hotspot and it works fine. T-Mobile is looking into it, but the solution may be to see if I can get the sub-channels down to 480 or lower resolution. any ideas?

 

 

T-Mobile got back to me and its not an issue with them as a carrier. instead it has to do with Apps not operating on IPV6.

he sent me this link: https://developer.apple.com/support/ipv6/

summary: Starting June 1, 2016, all apps submitted to the App Store must support IPv6-only networking. A majority of apps will not require any changes as IPv6 is already supported by NSURLSession and CFNetwork APIs. However, if your app utilizes IPv4-specific APIs or hard-coded IP addresses, you will need to make changes. Be sure to test for IPv6 compatibility before submitting your app to the App Store for review.

 

anyone know how to get in touch with goolink?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×