Wall mount for dome camera with 135mm diameter

Hi guys,

I need to mount 12 dome IP cameras with a diameter of 135mm each. All walls are concrete so I need like a base so as to hide the cables ( ethernet, power, audio, etc).

All bases I can find are slightly smaller, around 120mm.

Any ideas?

square junction boxes of 1000mm won´t look neat. I'm thinking in a rounded junction box of 70mm diameter and mounting the camera right next to it.

PS: all the cables are run through tubes outside the walls.

Cheers,

you could mount the camera directly onto a box like this if doesn't look out of place on site, any psu's / connections can be fitted inside box.

see bottom of page on link for some alternatives.

http://uk.rs-online.com/web/p/wall-boxes/1112351/

you could mount the camera directly onto a box like this if doesn't look out of place on site, any psu's / connections can be fitted inside box.

see bottom of page on link for some alternatives.

http://uk.rs-online.com/web/p/wall-boxes/1112351/

Thanks Jazzar.

The problem is that almost 20€ each and I have 12 cameras... I'll see If I can get a cheaper box.