Jump to content
thekenyan

Access DVRs connected to WAN on Lan.

Recommended Posts

Hi,

 

This is my first post on this forum . We have four DVRs with static IP addresses and our ISP both of whom are on ether1. We use a Mikrotik router.

 

The IP address for ether1 (WAN) are as follows;

 

DVRs : 10.7.7.11 , 10.7.7.12 , 10.7.7.25 and 10.7.7.26 with TCP port 377777 , HTTP port 80 and UDP port 37778

ISP : Static Port 10.40.1.2

 

 

The IP addresses for ether2 ( LAN) are as follows;

 

LAN IPs : 10.8.7.200 - 10.8.7.252

 

I wish to make the DVR IPs available from our LAN. Kindly help.

 

thekenyan

Share this post


Link to post
Share on other sites

Hi,

 

This is my first post on this forum . We have four DVRs with static IP addresses and our ISP both of whom are on ether1. We use a Mikrotik router.

 

The IP address for ether1 (WAN) are as follows;

 

DVRs : 10.7.7.11 , 10.7.7.12 , 10.7.7.25 and 10.7.7.26 with TCP port 377777 , HTTP port 80 and UDP port 37778

ISP : Static Port 10.40.1.2

 

 

The IP addresses for ether2 ( LAN) are as follows;

 

LAN IPs : 10.8.7.200 - 10.8.7.252

 

I wish to make the DVR IPs available from our LAN. Kindly help.

 

thekenyan

 

Change you Lan IP range to 10.7.7.200 to - 10.7.7.252, or change your DVR's to 10.8.7.xxx

 

Make sure everything is on the same subnet mask

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×