Jump to content
yazan

any way to view security monitor in remote lcd in local net

Recommended Posts

hi , we have 2 security camera DVR . in 2 places , all of these locations are connected to local network connection using 3 NanoBeam AC 5ghz - 16 dbi - airmax AC CPE . all network infrastructure support 1gb speed , for connecting computers in the location to the main computer , the question is : can i monitor the security systems in the remote locations direct to LCD in my office ? without internet !

some people talking about chrome-cast ..

 

is there any way to do this ?

any help / advise is deeply appreciated nand sorry for my bad English

Edited by Guest

Share this post


Link to post
Share on other sites

You are right!

 

Inglush very very bad; so, not able to follow...]RTFM? pg. 13[/url].

3. Instead of https://192.168.1.20, use the camera's IP you wish to view.

thanks .but i want to view it on LCD without using a pc

Share this post


Link to post
Share on other sites

Sorry, unable to help you there if at all possible (not worth my time and maybe yours).

No monitor specified.

No camera "DVR" specified.

Good luck!

Share this post


Link to post
Share on other sites

 

 

thanks for your answer . this is our plan ( img attached )

iam not using web cam , i have 3 dvr ( and 4 cameras connected to each dvr ) and every dvr is connected to lan caple

 

 

appreciating any help

aae.thumb.jpg.fb59fb6df478fd16b924efdef99c983b.jpg

Share this post


Link to post
Share on other sites
Best ask Expert tomcctv (or another cctv pro) directly, I am completely lost in what you are requesting.

Sorry.

iam sorry , and iam appreciating your answers

i want to connect ( or broadcast ) the remote dvr's to the lcd's in the admin office , no internet in the network ,

Share this post


Link to post
Share on other sites

Every dvr has a VGA (dvi) port where you can directly (~10 meters) connect monitor.

Also you can find vga (dvi) extender over cat5 to extend the range.

or

you can use your LAN to access dvr

  • Like 1

Share this post


Link to post
Share on other sites

http://www.hikvision.com/us/faq_93.html

 

Q: How to configure the HDMI and VGA to output independent display?

 

A: This option is only available for the 90xx-ST, 96xxNI-ST/RT and 7716NI-SP/16 series with firmware v3.0.2+. Log into the DVR/NVR locally,

 

Go to MENU, select SYSTEM CONFIGURATION and then select GENERAL (on left side).

 

Under MORE SETTINGS tab, make sure the option “Enable VGA/HDMI Synchronous Output” is unchecked.

 

Maybe that helps?

Share this post


Link to post
Share on other sites
hi , we have 2 security camera DVR . in 2 places , all of these locations are connected to local network connection using 3 NanoBeam AC 5ghz - 16 dbi - airmax AC CPE . all network infrastructure support 1gb speed , for connecting computers in the location to the main computer , the question is : can i monitor the security systems in the remote locations direct to LCD in my office ? without internet !

some people talking about chrome-cast ..

 

is there any way to do this ?

any help / advise is deeply appreciated nand sorry for my bad English

 

Hi are your cameras analog or IP?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×