Coax to Fiber optic converter

What is the best way to connect 8 cameras to a multimode fiberoptic line. My company does not do any fiber work (and will not start on this particular project) I want the fiber vendor to supply a connector/ termination device but do not know what to ask for. All the cameras are within a short distance of the fiber line. I would like to pull the cameras (either Cat5 or coax) to one point and tie in together. What will I need and who manufactures the devices I need; where can I buy them; and what kind of cost are we talking about? Thanks for your help.

If I have time tomorrow I'll check my catalog out to see what is out there.

I know I might get slammed for this, but is there any reason why you cannot run IP cameras?

We could use IP cameras.

If your going to use IP cameras you could use something like this

Zyxel.com

Its a 8 port gigabit switch with 1 SFP port. It also has full POE for the cameras.

on the other end you could use one if there Media Converter.

If you can use IP cameras, Blackbox and other manufacturers make media converters. I've used blackbox converters for copper to fiber to copper ethernet conversion. They work great, and they are backed with a super warrenty.

Otherwise, I see in my ADI catalog (yea yea yea, don't give me any crap ) that they have a few products made by IFS for GE that would work.

sometimes these "media converters" as posted above are also called

"transceivers" if this helps Used them plenty in the network field

http://www.supercircuits.com/Video-Baluns/FOTS-1

If it's multimode fibre 62.5 then ask for ST conectors.

If your going to use analog cameras and run them to a fibre converter with coax, I have used both of these and they work fine

sorry cannot post links yet:

www(dot)ifs(dot)com

www(dot)osd(dot)com(dot)au

If your going to use IP cameras then as mentioned previously run them in Cat5e to a POE switch with a fibre port.

We are a Fiber Optics Specialist specialise in Fiber Optics solutions for Video, Audio, Data, Ethernet etc. Please visit our web site (www . lightem . com) or contact me (alvinchau @ lightem . com)

What is the best way to connect 8 cameras to a multimode fiberoptic line. My company does not do any fiber work (and will not start on this particular project) I want the fiber vendor to supply a connector/ termination device but do not know what to ask for. All the cameras are within a short distance of the fiber line. I would like to pull the cameras (either Cat5 or coax) to one point and tie in together. What will I need and who manufactures the devices I need; where can I buy them; and what kind of cost are we talking about? Thanks for your help.

we are a fiber optical transmission provider with rich experience in security CCTV projects including 2008 Olympic Games.

We provide tailored solution for our customers. OEM/ODM welcomed.

We are also seeking distributor partner all over the world.

For more info please visit: www(dot)obtelecom(dot)com or send mail to jack(dot)obtelecom(dot)com

What is the best way to connect 8 cameras to a multimode fiberoptic line. My company does not do any fiber work (and will not start on this particular project) I want the fiber vendor to supply a connector/ termination device but do not know what to ask for. All the cameras are within a short distance of the fiber line. I would like to pull the cameras (either Cat5 or coax) to one point and tie in together. What will I need and who manufactures the devices I need; where can I buy them; and what kind of cost are we talking about? Thanks for your help.

maybe you need a 8 channel video fiber optical transmitter/receiver

this is really pretty old thread

to connect cameras with F.O. is very simple, F.O. has 75ohm BNC connectors for video connection, terminal blocks for PTZ data and power supply,SC/FC/ST fiber adapter for fiber cable connection

AOA China leading manufacturer of fiber media converter[/url], video optic converter, patch cord,adaptor,Attenuator,sfp

http://www.aoatech.com/fiber-media-converter.html